Advertisement
Quick Links
Advertisement
Related Manuals for Datacolor AutoLab SPS
Summary of Contents for Datacolor AutoLab SPS
- Page 1 Datacolor AutoLab SPS Quick Start Manual Part number: TF-0022-0961 Revision 2.0 1st July 2013...
- Page 2 Datacolor. Whilst every effort has been made to ensure the accuracy of this manual, Datacolor can accept no responsibility for any omissions or errors it may contain. Datacolor reserves the right to make improvements and/or changes in the product(s) features and specifications described in this manual at any time.
- Page 3 Datacolor AutoLab SPS Quick-start Manual CHAPTER 1: Quick Start..................5 CHAPTER 2: Safety ....................10 Representations and symbols..............10 Safety recommendations ................11 AutoLab SPS Quick start manual TFSTARTMANSPS / Rev 2.0 / 1st Jul 2013 / Jeffery Fain Page 3 of 11...
- Page 4 Datacolor AutoLab SPS Quick-start Manual Document version update log Revision 1 New document Revision 2 Change figures of software operation AutoLab SPS Quick start manual TFSTARTMANSPS / Rev 2.0 / 1st Jul 2013 / Jeffery Fain Page 4 of 11...
-
Page 5: Chapter 1: Quick Start
Datacolor AutoLab SPS Quick-start Manual CHAPTER 1: Quick Start LED Display Main Power Switch Step 1: Turn on the main power switch, and the “LED Display” will illuminate. HEATER ON Button AUTO/MANUAL Button Step 2: Check if the “AUTO/MANUAL” button is on, if not, press it to switch it on. - Page 6 Datacolor AutoLab SPS Quick-start Manual Actuality degrees Target degrees Up/Down Button Step 3: Make sure target temperature on controller is correct. If not, change it by following steps 4 to 6. Step 4: Press the “SET” button once, the green LED display will flash.
- Page 7 Datacolor AutoLab SPS Quick-start Manual Step 11: Go to link setting to check if SPS link to TF and get data from TF. Step 12: Go to DP Database-> Process for defining a make solution process. Step 13: Go to DP Database-> Solution to set up process, amount to make and fill up use hot water.
- Page 8 Datacolor AutoLab SPS Quick-start Manual Step 14: Go SPS Make Solution-> All Bottle List to select the bottle what you want to make solution. Double click on the bottle for starting to make the selected solution. Select Solution Step 15: Or go to SPS Make Solution-> Make Solution to key in a bottle number to make a solution.
- Page 9 Datacolor AutoLab SPS Quick-start Manual Step 17: Follow the on-screen messages to complete making the solution. Screen message AutoLab SPS Quick start manual TFSTARTMANSPS / Rev 2.0 / 1st Jul 2013 / Jeffery Fain Page 9 of 11...
-
Page 10: Chapter 2: Safety
Datacolor AutoLab SPS Quick-start Manual CHAPTER 2: Safety Representations and symbols Warning of a possible danger by heat or steam, which may lead to serious injury Warning of a possible electric shock, which may lead to serious injury Tips and important rules on the correct operation of the system. - Page 11 Datacolor AutoLab SPS Quick-start Manual Safety recommendations • Before turning on the system, make sure that the system operating voltage agrees with the main power voltage. • If the power cable is damaged, the system must be immediately disconnected from the electric supply.
Need help?
Do you have a question about the AutoLab SPS and is the answer not in the manual?
Questions and answers