Connection - Siemens HiPath Xpressions Unified Messaging User Manual

Mailbox Processing on the Telephone and the Voice Mail Service Voicemail
Operating your Mailbox with PhoneMail
3.2.5

Connection

You can call the switch or another user while you are connected to a mailbox. To do this, you
must select the main menu of the mailbox. To call a user while you are connected to the mail-
box:
7 push 7 in the main menu (see Section 3.2.3, "Options in the Main
0 Call user: push 0 or
# Cancel and return to the main menu or
6 Terminate the mailbox connection
Once you have pushed 0, the following options are available:
# Call the switch: push the pound key or
# Enter the required user number and conclude the entry with the pound
* # Enter the name of the relevant user by selecting letters that are as-
You can also set up a connection to external users, provided your system administrator has en-
abled this option. To do this, dial the trunk seizure code (normally 0) in front of the telephone
number.
After listening to a new or old message, you can enter 70 to connect directly to the originator
of the message (see Section 3.2.3.2, "Options available after messages have been heard").
3-32
Menu").
You now have the following options:
(see also Section 3.1.9.4, "Terminating the Connection").
key.
signed to the number keys and conclude your entries by pushing the
pound key.
A31003-S2330-B690-2-7619, January 2003
HiPath Xpressions V3.0, User Manual