Disable Call Forwarding - Siemens HiPath Xpressions Unified Messaging User Manual

vms.fm
Mailbox Processing on the Telephone and the Voice Mail Service
Operating your Mailbox using VMS
Enable or disable call forwarding
8 Select special functions in main menu:
0 8 Enable or disable call forwarding:
* Enter forwarding number and enable call forwarding:
* Enter the call forwarding number:
# If the entry was incorrect: delete the number entered:

# Disable call forwarding:

or
0 * Cancel the entire process and return to the main menu:
Setting a greeting for call forwarding (CF):
Setting a greeting for call forwarding allows you to define what happens to calls that are re-di-
rected to your mailbox. If you have programmed a fixed call forwarding destination (CF), calls
will be re-directed to your mailbox if your extension is busy, you do not answer the call or if you
enable call forwarding to your mailbox.
Accept messages or info greeting feature
●
You can use this feature to specify whether callers who are re-directed to your mailbox can
leave a message or not. Preventing callers from leaving messages is practical, for exam-
ple, if you are non-contactable for a long period of time. In this situation, you should provide
a message to alert callers to this fact.
Greetings
●
Callers who are diverted to your mailbox hear a greeting (a generic greeting is set by de-
fault). The following types of greetings can be distinguished:
– Personal greetings:
You can record nine different personal greetings, enabling you to select an appropriate
greeting for any particular situation from this range of greetings.
– Generic greetings:
3-74
Push 8.
Push 0 and then push 8.
Push the star key.
Enter the relevant number and push the star key to conclude the entry.
Push the pound key. You can resume the process of entering the call for-
warding number immediately afterwards.
Push the pound key.
Push 0 and then push the star key.
A31003-S2330-B690-2-7619, January 2003
HiPath Xpressions V3.0, User Manual
For internal use only