Table of Contents
Advertisement
20.5.99
Telephone connecting cord
Step 3: Program the multiple subscriber numbers (MSNs)
kap03.fm5
Both ends of the telephone connecting cord have the
same connector.
Insert one connector into the socket labelledD on the
underside of the device and insert the other connector
into your ISDN socket. Feed the cable into the cable run.
In both cases, the connectors must engage audibly.
If you have connected the Profiset 70isdn correctly, the
following message now appears on the telephone dis-
play:
MSN missing
Configuration?
We recommend that you enter the MSNs when first
putting the telephone into service, because only then can
you use the answering machine functions. The MSNs
(multiple subscriber numbers) are the directory numbers
you were assigned for your ISDN connection. These num-
bers are entered as follows:
Press the
?
MSN 1
_
Continue with OK
Enter one of the three MSNs using keys
You received the MSNs from the network provider with
your ISDN connection. Do not enter any country or area
codes!
Confirm your entry with
Press
?
when finished.
MSN 2
_
Continue with OK
Enter the second MSN. Confirm your entry with
MSN 3
_
Continue with OK
Enter the third MSN. Confirm your entry with
It is not necessary to enter MSNs 2 and 3. If you
do not want to enter these MSNs, skip the
prompt for these numbers by pressing
out entering any digits.
MSNs can be entered at any time (
Profiset 70isdn, GB: A30853-X300-B501-3-7619
Putting the system into service
>
key twice.
?
.
through
.
0
9
?
.
.
?
with-
?
page 18).
9
Advertisement
Table of Contents
