To Reset The Console; Finishing Your Workout; Bluetooth Heart Rate Monitoring; Using Your Music Device - Horizon Fitness 7.0AT Owner's Manual

Additional target heart rate notes:
1). The treadmill incline will automatically adjust to bring you near your specified heart rate.
2). If there is no heart rate detected, the unit will not change the incline.
3). If your heart rate is 25 beats over your target zone the program will shut down.

TO RESET THE CONSOLE

Hold STOP key for 3 seconds.

FINISHING YOUR WORKOUT

When your workout is complete, the unit will beep. Your workout information will stay displayed on the console for 30 seconds and then reset.

BLUETOOTH HEART RATE MONITORING

The 7.0AT is equipped with multi-channel Bluetooth which enables you to wirelessly connect compatible Bluetooth heart rate monitoring
devices to this treadmill. You will need to ensure that your wireless heart rate monitoring device is Bluetooth 4.0 compatible and is also "open"
to sharing data. Non-"open" or "closed" devices typically only share data with their proprietary apps. The 7.0AT needs an "open" device to
receive data from the device. You may need to consult with your device's owner's manual or the manufacturer to confirm if it is an open device.
Pair the receiver to the app and the console will receive the information from the tablet. To use the Bluetooth chest strap without a tablet,
press and hold the Bluetooth button to enable the console to communicate with the receiver. When paired with the chest strap the
console will not pair with a tablet. To enable tablet communication press and hold the Bluetooth button for 5 seconds or reset power.

USING YOUR MUSIC DEVICE

The 7.0AT treadmill will connect and stream music form your compatible music device. This includes many smart phones and traditional mp3
players.
Your 7.0AT comes equipped with Bluetooth speakers. Bluetooth compatible devices can stream music wirelessly from your device to the
speakers. You can also connect your music device via an audio cable and stream music through the speakers. Instructions for both types of
27
audio connection are detailed below.