SMART-PULP
7.2
Materials for wetted parts
Metal parts in contact with process medium:
a. AISI316L
Used in most applications.
b. Titanium
Used in applications that contain chlorine or chlorine
dioxide.
c. Hastelloy C276
Used in applications that contain both chlorine
dioxide and peroxide.
AUSTRALIA; Valmet Automation (Australia) Pty. Ltd., Suite 3, 677 Boronia Rd., Wantirna, Victoria 3152, Australia, Tel. +61 3 9887 3177, Telefax +61 3 9887
3629, AUSTRIA; Valmet Automation Ges.m.b.H, Franzosengraben 12, A-1030 Vienna, Austria, Tel. +431 79 552 0, Telefax +431 79 552 28, FRANCE; Valmet
Automation France, Bordeaux Technowest, Les Cinq Chemins, B.P. 34, 33186 Le Haillan, France, Tel. +33 57 921040, Telefax +33 57 921042, GERMANY;
Valmet Automation GmbH,Grünwalder Weg 28 b, D-82041 Oberhaching, Germany, Tel. +49 89 6138080, Telefax +49 89 61380855, JAPAN; Valmet
Automation K.K., Aoyama Kobayashi Bldg 6F., 7-4 Shibuya 1-Chome, Shibuya-ku, Tokyo 150, Japan, Tel. +81 3 34868201, Telefax +81 3 34869225, THE
NETHERLANDS; Valmet Automation B.V., PO Box 775, 3700 AT Zeist, The Netherlands, Tel. +31 30 6956500, Telefax +31 30 6953951, NORTH AMERICA;
Valmet Automation (USA) Inc., 30 Thomas Drive, Westbrook, ME 04092, USA, Tel. + 1 207 774 4461, Telefax + 1 207 774 1065, SINGAPORE; Valmet (SEA)
Pte Ltd./Automation Division, 152 Beach Road, # 24-05/08 Gateway East, Singapore 189721, Republic of Singapore, Tel. +65 294 5855, Telefax +65 294 1193,
UNITED KINGDOM; Valmet Automation Ltd.,13 Campbell Court, Bramley, Tadley, Hampshire, RG26 5EG, UK, Tel. +44 1256 880300, Telefax +44 1256
880280.
Smart Consistency Transmitter
MEETS THE COUNCIL OF THE EUROPEAN UNION DIRECTIVE
89/336/EEC FOR ELECTROMAGNETIC COMPATIBILITY
REQUIREMENTS.
Valmet Automation Inc., Measurements
PO Box 237, FIN-33101 Tampere, Finland
Tel +358 3 2668 111, Telefax +358 3 2668 448
Gaskets in contact with process medium:
· Part No. 90 in Parts List (chapter 5): PTFE.
· Part Nos. 80 and 39 in Parts List: special rubber.
44
BCs160VA
Nov. 15, 1997
Need help?
Do you have a question about the SMART-PULP and is the answer not in the manual?