FP Mailing Solutions Optimail Operator's Manual page 58

58
Optimail Operator Manual
Step 7: Loading postage
Self-test
The display shows a dash running from the right to
the left side. This is concluded with two beeps. Now
all segments of the display will briefly illuminate,
followed by another beep. The current date is then
displayed.
After about 18 seconds, the self-test is completed.
The Optimail will beep again and the postage value
display appears.
Before you can meter letters with the Optimail for the
first time, you have to load a certain postage amount
into your Optimail (at least $ 10). Read Chapter 7 on
page 24 to find out how to load postage.
We will gladly provide support for installing and
commissioning your Optimail.
Simply contact our Service.