Switching Optimail On/Off - FP Mailing Solutions Optimail Operator's Manual

10
Optimail Operator Manual
3

Switching Optimail on/off

ON
OFF
Self-test
Ready for metering
Sleep mode
Switching on
•
Insert the key in the keylock on the back of the
Optimail.
•
Turn the key to the horizontal position ( = ON).
The display shows a dash running from the right to
the left side. This is concluded with two beeps. Now
all segments of the display will briefly illuminate,
followed by another beep. The current date is then
displayed.
After about 18 seconds, the self-test is completed.
The Optimail will beep again and the last set postage
value appears. The Optimail is ready for metering.
If the Optimail is not used for about one minute, i.e.
no imprints are made or no key is pressed, the
postage meter switches over to the time display.
Reactivate the Optimail with the key
Switching off
•
Turn the key to the vertical position ( = OFF).
•
Remove the key. Your Optimail is now safe from
unauthorized use.
.