FP Mailing Solutions Optimail Operator's Manual page 48

48
Optimail Operator Manual
Problem
Letter jammed / mail jam.
Optimail blocked.
Metering not possible.
Metering not possible.
Repeated 'beeping' and
flashing of the DATE symbol
when switching on.
Possible cause and remedy
Caution! Jam! Do not remove the jammed
letter by force. The ribbon could tear.
Always clear a mail jam like this:
Press any key (except the key
The Optimail releases the letter. Remove the
letter.
Then check the ribbon cassette. Remove the rib-
bon cassette and tighten the ribbon if necessary
( Chapter 11.2).
Switch off the Optimail. Wait briefly and switch
back on.
Account M0 is set. No metering can be performed
on account M0.
Set an account between M1 and M9.
No postage available (display: Limit End).
The set postage value cannot be metered. Load
new postage ( Chapter 7).
Scales function is switched on (display:
no postage scale is connected.
Disable the scales function with the
Built-in clock stopped.
Set the date ( Chapter 8.1) and time (
If this does not work or if this problem occurs
repeatedly, please contact Service.
!) or switch off.
) but
key.
8.2).