Related Manuals for Nice RO500
Summary of Contents for Nice RO500
- Page 1 RO500 0682 Sliding gate opener EN - Instructions and warnings for installation and use Manual verride procedure - Page...
-
Page 2: General Safety Warnings And Precautions
ENGLISH manual and in combination with the articles listed in the product catalogue of Nice S.p.a. These requirements may not be guaranteed if the product is used in configurations or with other products not envisaged; use of the product in these situations is strictly prohibited unless the installer has ver- ified that all requirements of the directive have been met. - Page 3 3.4 - Preliminary set-up work • Fit one or more sheaths for routing the electric cables. Fig. 2, shows an example of an automation system set up with Nice com- Fixing the foundation plate ponents. These parts are positioned according to a typical standard lay- out.
-
Page 4: Electrical Connections
04. Move the gate to the maximum opening position then position the first make the earthing connection on the terminal as shown in fig. 12. section of the rack above the pinion of the gearmotor (fig. 8). Impor- tant:- the total length of the rack must be the same as the length of Description of electrical connections the gate leaf;... -
Page 5: Parameter Settings
is active and ready to receive commands. Table A - 1 quick double flash = indicates when the microprocessor reads a varia- Switch 1-2: Off-Off Manual movement, i.e. hold-to-run tion in the operating status of an input (either of a control input or function On-Off Semi-automatic movement dipswitch);... -
Page 6: Programming The Radio Receiver
Therefore the programming procedure must be repeated for each trans- mitter key to be memorised. PROGRAMMING THE RADIO RECEIVER 01.Refer to the “Controls Table” to select the commands available; select the command to assign to the transmitter key to be memorised and then note the number corresponding to the command. -
Page 7: Automation Testing And Commissioning
AUTOMATION TESTING AND PRODUCT DISPOSAL COMMISSIONING CAUTION! – All operations in this chapter must be performed exclu- This product is an integral part of the automation and therefore must be disposed together with the latter. sively by skilled and qualified personnel, in observance of the instruc- tions in the manual, and current local legislation and safety standards As in installation, also at the end of product lifetime, the disassembly and in the place of installation. -
Page 8: Technical Specifications Of Product
TECHNICAL SPECIFICATIONS OF PRODUCT Mains power supply 230 Vac 50 Hz Motor Asynchronous-single phase Limit switch type Electromechanical Max. power absorption 400 W Line Absorption 1.7 A Built-in capacitor 12 nF Protection rating IP 44 Maximum torque 15 Nm (500 N) (corresponding to force) Nominal torque 8 Nm (270 N) -
Page 9: Safety Warnings And Precautions
MANUALLY RELEASING OR LOCKING THE GEARMOTOR OPERATION MANUAL The gearmotor is equipped with a mechanical system that enables manu- al opening and closing of the gate. (to deliver to the automation user) These manual operations must be performed in the event of a power fail- ure or system malfunctions. -
Page 10: Ce Declaration Of Conformity
Note: The contents of this declaration correspond to those of the official docu- Nota: Il contenuto di questa dichiarazione corrisponde a quanto dichiarato nel ment, deposited at the registered offices of Nice S.p.a., and in particular to the last documento ufficiale depositato presso la sede di Nice S.p.a., e in particolare, alla revision available before printing of this manual. - Page 11 90 mm 290 mm 195 mm...
- Page 15 Ph. +351.21.922.82.10 Ph. +39.049.87.01.05.1 Nice Australia infomarseille@fr.niceforyou.com Fax +351.21.922.82.19 Fax +39.049.87.07.63.8 Wetherill Park Australia info@pt.niceforyou.com infopd@niceforyou.com Ph. +61.(0)2.96.04.25.70 Nice France Rhône Alpes Fax +61.(0)2.96.04.25.73 Nice Roma Decines Charpieu France Nice Romania info@au.niceforyou.com Roma Italia Cluj Napoca Romania Ph. +33.(0)4.78.26.56.53 Ph. +39.06.72.67.17.61 Ph./Fax +40.(0)264.453.127...
Need help?
Do you have a question about the RO500 and is the answer not in the manual?
Questions and answers