Camera Control And Performing A Scan; Software: Sklinescan; Function Overview: Sklinescan Toolbar - Schäfter+Kirchhoff SK1024VSD Instruction Manual
Monochrome line scan camera
1024 pixels 14 x 14mm2, line frequency up to 27 khz.
line scan camera with large dynamic range and 27 khz maximum line rate,
anti blooming and integration control.
Table of Contents
Advertisement
3
Camera Control and Performing a Scan
3.1
Software: SkLineScan
This section is a brief introduction to the SkLineScan adjustment and configuration software. A more detailed
description is provided in the separate SkLineScan manual. The pdf is included in the SkLineScan installation
package or is available for download from the Schäfter + Kirchhoff website under http://www.sukhamburg.com/
supporte.html.
Detailed instructions on how to obtain optimal image data and use the data with the Schäfter+Kirchhoff
software package can be found in the SkLineScan Software Manual.
The most common functions of the line scan camera can be controlled by menu items and dialog boxes.
In the "Camera Gain / Offset Control" dialog there is a command line for entering further control commands.
Click on the desktop icon to start the SkLineScan
program.
The SkLineScan program recog nizes the connected line
scan cameras automatically. The identified cameras are
shown in the start-up dialog
If the SK1024VSD camera is identified correctly,
confirm with "OK". The "Signal window" graphicaly
showing the intensity signals of the sensor pixels (oscil-
loscope display) will open. It is responsive in real-time
and the zoom function can be used to highlight an area
of interest. The oscilloscope display is ideally suited
for parameterizing the camera, for evaluating object
illumination, for focussing the image or for aligning the
line scan camera correctly.
Function Overview: SkLineScan Toolbar
„
New line scan. All open "Signal window" windows will be closed. [F2]
"Camera Control" dialog for parameter settings: integration time, line frequency, synchronization
mode, thresholding
Zooming in and out
New line scan. "Area Scan" windows will be closed, "Signal window" windows will remain open. [F2]
Threshold mode in new binary signal window.
"Shading Correction" dialog to adjust the white balance [Alt + s]
"Gain/Offset Control" dialog, also for commands input [Shif+F4]
New area scan
Instruction Manual SK1024VSD
12
.
A
Platzhalter für Grafiken in anderen Ebenen
© 2019-02 E
Camera Control and Performing a Scan
A
SkLineScan: Start-up dialog
SkLineScan: Toolbar
Hide quick links:
Advertisement
Table of Contents
