Configuration Example 2 - Siemens SANTIS-ab User Manual

Configuration Example 2:

A fax machine gr.3 is connected to the a/b1-interface.
Thus the MSN and HLC are to be set:
MSN = 456, HLC = fax gr.2/3 for a/b1.
1. Hook off and wait for dial tone, then dial
→ the dial tone is switched off
2.
→ 1st MSN for a/b1
3. When the permanent tone is switched on proceed to 4 and
dial
→ HLC for a/b1
4.
5. When the permanent tone is switched on, hook on.
24