Advertisement
1-3 SAFETY IN OPERATING
1-3-1 When turn on the machine in the first time, use low speed
to operate and check the correct rotation direction.
1-3-2 During the machine operated, please don't touch hand-wheel,
needle, presser foot ...... which are easy to injured parts.
1-3-3 Please don't operate the machine under to take out the
Belt Cover and another safety advice
1-3-4 During machine be operated, please don't open the front
aluminum chip cover of needle bar.
1-3-5 During machine be operated, please don't use hand or
another article to touch the belt which to avoid the
injury ! (Fig.1)
1-4 SAFETY IN MAINTENANCE AND REPAIRS
Power must be turned off first, when:
1-4-1 Uninstall the motor to the control box., or plug and unplug
any connector.
1-4-2 Turn off the power and wait 10 minutes before opening
box cover.
1-4-3 Raising the machine arms or chcnging needle, or threading
needle.(show as above)
1-4-4 Repairing or doing any mechanical adjustment.
1-4-5 Machines rest.
-2-
(Fig.1)
Electrical risk warning
Advertisement
