Page 1
IP67 IoT Gateway Intel® Apollo Lake N3350, 1.1 GHz EAC Mini EACIL67 User Manual Document Version 1.0 Document Part Number: 91521110102V Please read these instructions carefully before using this product, and save this manual for future use.
EAC Mini EACIL67 IoT Gateway User Manual Preface Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer.
Page 5
Preface Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory. Note: A note is used to emphasize helpful information Important:...
Page 6
EAC Mini EACIL67 IoT Gateway User Manual Safety Precautions For your safety carefully read all the safety instructions before using the device. All cautions and warnings on the equipment should be noted. Keep this user manual for future reference. Caution...
Page 7
Preface Important Information Federal Communications Commission Radio Frequency Interface Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received including ...
The documentation set for the Winmate® EAC Mini EACIL67 IoT Gateway provides information for specific user needs, and includes: EAC Mini EACIL67 Quick Start Guide - describes how to get the box computer up and running. EAC Mini EACIL67 User Manual – contains detailed description on how to use the display, its components and features.
Chapter 1: Introduction Chapter 1: Introduction This chapter provides the EAC Mini EACIL67 IoT Gateway product overview, describes its features and hardware specifications.
Congratulations on purchasing Winmate® EAC Mini EACIL67 IoT Gateway The EAC Mini EACIL67 is a compact industrial IoT gateway with low power consuming Intel® Apollo Lake N3350 processor and full IP67 design. Wireless connectivity and all necessary connectors allow the EAC mini (EACIL67) to send data from manufacturing facilities directly to cloud server.
EAC Mini EACIL67 IoT Gateway User Manual 1.5 Package Contents Carefully remove the box and unpack EAC Mini EACIL67 IoT Gateway. Please check if all the items listed below are inside your package. If any of these items are missing or damaged contact us immediately.
Chapter 1: Introduction 1.6 Appearance This section includes front and rear side I/O ports location of the EACIL67 IoT Gateway. Front Side Rear Side...
Chapter 2: Hardware Installation Chapter 2: Hardware Installation This chapter provides information on how to use external I/O and the installation of EAC Mini EACIL67 IoT Gateway hardware.
2.1.1 Power Connector EAC Mini EACIL67 has 3 pin M12 type power input connector that accepts 9 V DC to 36 V DC voltages. Use power cable supplied with EACIP67 to connect the EACIP67 to the source of power.
2.1.4 USB 3.1 Type-C Connector EAC Mini EACIL67 has one USB 3.1 Type-C connector that works in Alt Mode and provides Display Port A/V output, USB data transfer and provides up to 10W (5V/ 2A) power. Use waterproof cable to connect EACIL67 to external devices such as external PC, mouse or keyboard.
3. Screw the two screws on board to fix mSATA. Screw back the bottom cover. 2.2.2 External Antenna Installation Notice that external antenna is an optional feature of the EAC Mini EACIL67. If you order EAC Mini EACIL67 with Wi-Fi, SMA antenna comes pre-installed. To install external SMA antenna: 1.
Chapter 2: Hardware Installation 2.3 Connecting Power The DC power supply connector of the EAC Mini IoT Gateway is on the front panel. The DC power input for the EAC Mini allows a voltage input range from 9 V DC to 36 V DC. Warning! Ensure voltage and polarity is compliant with the DC input.
The EAC Mini supports five types of mounting: wall and desk mounting by default, and optional VESA mount solutions. You can purchase mounting kit from Winmate as an optional accessory. This chapter provides step-by-step mounting guide for all available mounting options.
Chapter 3: Mounting 3.1 Wall/ Desk Mount L-shape mounting brackets for wall/ desk mounting are supplied with the EAC Mini. Mounting Instruction: 1. Fasten screws to secure L-shape mounting brackets to the EAC Mini 2. Place the EAC Mini on the fixture (ex. table) and fasten screws to secure the unit to the fixture.
EAC Mini EACIL67 IoT Gateway User Manual 3.2 VESA Mount You can purchase VESA mounting kit from Winmate as an optional accessory. VESA Mounting Kit Part Number: 98K000A000BJ Mounting Instruction: 1. Mark the location of the screw holes on the fixture (ex. wall).
Chapter 4: Insyde UEFI BIOS Setup Chapter 4: Insyde UEFI BIOS Setup BIOS Setup Utility is a program for configuration basic Input / Output system settings of the computer for optimum use. This chapter provides information on how to use BIOS setup, its functions and menu.
EAC Mini EACIL67 IoT Gateway User Manual 4.1 How and When to Use BIOS Setup To enter the BIOS setup, you need to connect an external USB keyboard, external monitor and press Del key when the prompt appears on the screen during start up. The prompt screen shows only few seconds so need press Del key quickly.
Chapter 4: Insyde UEFI BIOS Setup 4.2 BIOS Functions 4.2.1 Main Menu The Main menu displays the basic information about yoursystem including BIOS version, processor RC version, system language, time, and date. When you enter BIOS setup, the first menu that appears on the screen is the main menu.It contains the system information including BIOS version, processor RC version, system language, time, and date.
EAC Mini EACIL67 IoT Gateway User Manual 4.2.2 Advanced Settings Select the Advanced Tab from the setup menu to enter the advanced BIOS setup screen. You can select any of the items on the left frame of the screen to go to the sub menu for the item, such as CPU Configuration.
Page 27
Chapter 4: Insyde UEFI BIOS Setup 4.2.2.1 Boot Configuration BIOS Setting Description Setting Option Effect Select the OS of your OS Selection Windows/ Linux Select OS computer. 4.2.2.2 GOP and IGD Configuration...
Page 28
EAC Mini EACIL67 IoT Gateway User Manual BIOS Setting Description Setting Option Effect GOP Configuration Enable GOP Driver will Enabled Use this item to enable or GOP Driver unload VBIOS disable GOP Driver Disabled Disable It will load VBIOS IGD Configuration...
Page 29
Chapter 4: Insyde UEFI BIOS Setup Select DVMT 5.0 Use this item to select 128MB/ 256MB/ Graphics memory size DVMT Total Gfx Mem DVMT Total Gfx Mem used by Internal Graphics Device. 144MHz/ Select the highest CD Use this item to select CD 288MHz/ CD Clock Frequency Clock Frequency...
Page 30
EAC Mini EACIL67 IoT Gateway User Manual 4.2.2.3.1 PCI Express Configuration BIOS Setting Description Setting Option Effect PCI Express Clock Use this item to select PCI PCI Express Clock Gating enable/ Express Clock Gating Enabled/ Disabled Gating disable for each root...
Page 32
EAC Mini EACIL67 IoT Gateway User Manual BIOS Setting Description Setting Option Effect PCI Express Active State Power Disabled/ L0s/ Set the parameters of ASPM Management setting L1/ L0sL1/ Auto ASPM Disabled/ L1.1/ Set the parameters of L1 L1 Substates PCI Express L1 Substate settings L1.2/...
Page 34
EAC Mini EACIL67 IoT Gateway User Manual BIOS Setting Description Setting Option Effect The Chipset SATA controller Chipset-SATA supports the 2 black Enables/ Disables the Controller Enabled/ Disabled Internal SATA ports (up to 3 Chipset-SATA Controller Configuration GBb/s supported per port)
Page 38
EAC Mini EACIL67 IoT Gateway User Manual 4.2.2.8 TXE and TPM Configuration Setting BIOS Setting Description Effect Option Configure Target TPM Target TPM device fTPM/ dTPM Select fTPM or dTPM device settings...
Page 39
Chapter 4: Insyde UEFI BIOS Setup 4.2.2.9 Thermal Configuration Parameters Setting BIOS Setting Description Effect Option Configure _CTR, _PSV, and _ACO automatically based on values Enabled/ Automatic Thermal Set to Disabled for manual recommended in BWG’s Disabled Reporting configuration Thermal Reporting for Thermal Management settings This value controls the...
Page 40
EAC Mini EACIL67 IoT Gateway User Manual 4.2.2.10 WDT Configuration Setting BIOS Setting Description Effect Option Enabled/ Configure WDT settings Enable/Disable WDT Disabled Check Hardware Monitor Hardware Monitor Press Enter Open sub-menu settings GPIO Group 0 Check GPIO Group 0...
Page 41
Chapter 4: Insyde UEFI BIOS Setup Hardware Monitor GPIO Group 0 Configuration Setting BIOS Setting Description Effect Option User can pull internal Push Pull/ Set Push Pull or Open Internal Resistance resistance push-pull/ open- Open Drain Drain drain Set the GPIO is input or Set the GPIO is input or Input/ Output Mode Input/ Output...
Page 42
EAC Mini EACIL67 IoT Gateway User Manual 4.2.2.11 H2oUve Setup Setting BIOS Setting Description Effect Option Enable/ Disable Interface Enabled/ Enable/ Disable H2oUve H2oUve Support Disabled for H2oUve tool Support...
Chapter 4: Insyde UEFI BIOS Setup 4.2.3 Security Menu This section allows configuring and improving system, and setting up some system features according to your preferences. Setting BIOS Setting Description Effect Option TrEE Protocol Select TrEE Protocol Select TrEE Protocol 1.0/ 1.1 Version Version: 1.0 or 1.1...
EAC Mini EACIL67 IoT Gateway User Manual 4.2.4 Power Menu Setting BIOS Setting Description Effect Option CPU Configuration Check CPU Configuration Press Enter Opens sub-menu...
Page 45
Chapter 4: Insyde UEFI BIOS Setup 4.2.4.1 CPU Configuration BIOS Setting Description Setting Option Effect When a processor thermal If bi-direction is enabled, Enabled/ Bi-directional sensor trips (either core) , external agents can drive Disabled PROCHOT# the PROCHOT# will be PROCHOT# to throttle the driven processor...
Page 46
EAC Mini EACIL67 IoT Gateway User Manual 4.2.4.2 System Power Options Setting BIOS Setting Description Effect Option Allows more than two Enabled/ Enable/ Disable Intel® Intel® SpeedStep frequency range to be Disabled (tm) SpeedStep (tm) supported Boot Configure Boot Select the performance state...
Page 48
EAC Mini EACIL67 IoT Gateway User Manual Setting BIOS Setting Description Effect Option Configure Boot Type Dual / Legacy/ Select boot type to Dual, Boot Type settings UEFI Legacy or UEFI type Allows InsideH20 to skip Enabled/ Configure Quick Boot certain tests while booting.
EAC Mini EACIL67 IoT Gateway User Manual 4.3 Using Recovery Wizard to Restore Computer Note: Before starting the recovery process, make sure to backup all user data. The data will be lost after the recovery process. Important: Before starting the recovery process, remove the PCI/ PCIe card and CFast card.
Chapter 4: Insyde UEFI BIOS Setup 4.4 How to Enable Watchdog To enable Watchdog, you need to download Winmate Watchdog utility. Find more information on Watchdog in “Watchdog Guide” that you can download from Winmate Download Center. To enable watchdog in Watchdog AP follow the instructions below: 1.
EAC Mini EACIL67 IoT Gateway User Manual Chapter 5: Driver Installation This chapter provides instructions on how to install drivers on the EAC Mini IoT Gateway. Notice that pictures in this example are for Windows 10 OS.
Chapter 5: Driver Installation 5.1 Chipset Driver Installation To install chipset driver: 1. Open the driver CD and double-click on Chipset driver. 2. The system opens installation window, click Next to continue.
Page 54
EAC Mini EACIL67 IoT Gateway User Manual 3. Click Accept to agree to the license terms. 4. Check installation details and click Install. 5. The installation is complete, click Finish to exit installation window.
Chapter 5: Driver Installation 5.2 Graphic Driver Installation To install graphic driver: 1. Open the driver CD and double-click on Graphic driver. 2. The system opens installation window, click Next to continue.
Page 56
EAC Mini EACIL67 IoT Gateway User Manual 3. Click Accept to agree to the license terms. Check installation details and click Install. 5. Wait for the system to install the driver.
Page 57
Chapter 5: Driver Installation 6. The installation is complete, click Next to continue. 7. Select Accept, and exit installation window.
EAC Mini EACIL67 IoT Gateway User Manual 5.3 TXE (Trusted Execution Engine) Driver Installation To install TXE (Trusted Execution Engine) driver: 1. Open the driver CD and double-click on TXE driver. 2. The system opens installation window, click Next to continue.
Page 59
Chapter 5: Driver Installation 3. Click Next to agree to the license terms. 4. Check installation details and click Next. 5. Wait for the system to install the driver.
EAC Mini EACIL67 IoT Gateway User Manual 6. The installation is complete, click Finish to exit installation window. 5.4 Serial IO Driver Installation To install Serial IO driver: 1. Open the driver CD and double-click on Serial IO driver. 2. The system opens installation window, click Next to continue.
Page 61
Chapter 5: Driver Installation 3. Click Accept to agree to the license terms. 4. Check installation details and click Install. Click Next to continue.
Page 62
EAC Mini EACIL67 IoT Gateway User Manual 6. Wait for the system to install the driver. 7. The installation is complete, click Finish to exit installation window.
Chapter 5: Driver Installation 5.5 LAN Driver Installation To install LAN driver: 1. Open the driver CD and double-click on LAN driver. 2. The system opens installation window.
Page 64
EAC Mini EACIL67 IoT Gateway User Manual 3. Click Next to continue. 4. Press Next to continue. 5. Press Next to continue.
Page 65
Chapter 5: Driver Installation 6. Press Install. 7. Wait for the system to install driver. 8. The installation is complete, click Finish to exit installation window.
EAC Mini EACIL67 IoT Gateway User Manual Chapter 6: Technical Support This chapter includes pathway for technical support and Software Development Kit (SDK). Free technical support is available from our engineers every business day. We are always ready to give advice on application requirements or specific information on the installation and operation of any of our products.
Chapter 6: Technical Support 6.1 Software Developer Support You can download SDK, derivers and other document from Winmate Download Center. Winmate Download Center www.winmate.com > Support > Download Center > Embedded Computing > EAC Mini 6.2 Problem Report Form IoT Gateway...
Appendix Appendix A: Order Information EAC Mini EACIL67IoT Gateway available in the following configurations: Model Name Configuration Intel® N3350, 4G RAM, 64GB eMMC, EACIL67-100-A464 1 x USB Type-C, 1 x USB Type-A, 2 x GbELAN, Intel® N3350, 4G RAM, 64GB eMMC, EACIL67-101-A464 1 x USB Type-C, 1 x USB Type-A, 2 x GbELAN, Wi-Fi Intel®...
Need help?
Do you have a question about the EAC Mini EACIL67 and is the answer not in the manual?
Questions and answers