Related Manuals for Winmate EAC Mini EACIL20
Summary of Contents for Winmate EAC Mini EACIL20
-
Page 1: User Manual
IoT Gateway Intel® Apollo Lake N3350 1.1 GHz EAC Mini EACIL20 User Manual Version 1.0... -
Page 3: Table Of Contents
USER MANUAL CONTENTS CONTENTS PREFACE ......................- 3 - ABOUT THIS USER MANUAL ............... - 10 - CHAPTER 1: INTRODUCTION ............... - 12 - 1.1 Overview ..................- 12 - 1.2 Product Features ................- 12 - 1.3 Expansion Module ................- 12 - 1.3 Hardware Specifications .............. - Page 4 USER MANUAL CONTENTS 4.2.1 Main Menu ................- 32 - 4.2.2 Advanced Settings ..............- 33 - 4.2.4 Security Menu ............... - 51 - 4.2.5 Power Menu ................- 52 - 4.2.3 Boot Menu ................- 55 - 4.2.3 Exit Menu ................- 57 - 4.3 Using Recovery Wizard to Restore Computer .........
-
Page 5: Preface
USER MANUAL PREFACE PREFACE Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. -
Page 6: Customer Service
USER MANUAL PREFACE Customer Service We provide a service guide for any problem by the following steps: First, visit the website of our distributor to find the update information about the product. Second, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance. - Page 7 USER MANUAL PREFACE Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory.
-
Page 8: Safety Information
USER MANUAL PREFACE Safety Information WARNING! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. -
Page 9: Safety Precautions
USER MANUAL PREFACE Safety Precautions For your safety carefully read all the safety instructions before using the device. All cautions and warnings on the equipment should be noted. Keep this user manual for future reference. CAUTION Do not cover the openings! *Let service personnel to check the equipment in case any of the following problems appear: o The power cord or plug is damaged. -
Page 10: Important Information
USER MANUAL PREFACE Important Information Countries/ Symbol This equipment complies with essential Area requirements of: FCC Part 15 Subpart B Regulations Class B Electromagnetic Compatibility Directive(2014/30/EU) Low Voltage Directive (2014/35/EU) Restrictions of the use of certain hazardous European Union substances (RoHS) Directive (2011/65/EU) Federal Communications Commission Radio Frequency Interface Statement This device complies with part 15 FCC rules. - Page 11 USER MANUAL PREFACE European Union This equipment is in conformity with the requirement of the following EU legislations and harmonized standards. Product also complies with the Council directions. Electromagnetic Compatibility Directive (2014/30/EU) EN55024: 2010+A1: 2015 o IEC61000-4-2: 2009 o IEC61000-4-3: 2006+A1: 2007+A2: 2010 o IEC61000-4-4: 2012 o IEC61000-4-5: 2014 o IEC61000-4-6: 2014...
-
Page 12: About This User Manual
The documentation set for the Winmate® EAC Mini EACIL20 IoT Gateway provides information for specific user needs, and includes: EAC Mini EACIL20 Quick Start Guide - describes how to get the box computer up and running. EAC Mini EACIL20 User Manual – contains detailed description on how to use the display, its components and features. -
Page 13: Chapter 1: Introduction
USER MANUAL CHAPTER 1 INTRODUCTION INTRODUCTION This chapter provides the EAC Mini EACIL20 IoT Gateway product overview, describes its features and hardware specifications. - 11 -... -
Page 14: Overview
1.1 Overview Congratulations on purchasing Winmate® EAC Mini EACIL20 IoT Gateway The EAC Mini EACIL20 is a compact industrial IoT Gateway with low power consuming Intel® Apollo Lake N3350 1.1 GHz processor. The EAC Mini provides great expansion including one Mini-PCIe and SIM card support. Expansion module offers great options from additional USB ports to Bluetooth 4.0, Wi-Fi and... -
Page 15: Hardware Specifications
USER MANUAL CHAPTER 1 INTRODUCTION 1.3 Hardware Specifications Model Name EACIL20 Intel® Apollo Lake N3350 1.1 GHz Graphics Intel® HD Graphics Engine System BIOS Insyde UEFI Specification Watchdog Programmable 256 levels, timer interval 1 to Timer 255 sec. Technology 4GB LPDDR3 1866MHz eMMC Onboard 32 GB Storage... - Page 16 USER MANUAL CHAPTER 1 INTRODUCTION Weight 0.6 kg (One layer), 0.7 kg (double layer) Desk Mounting (Default), Wall Mounting Mounting (Default), VESA Mounting (Optional), DIN-Rail Mounting (Optional), Pole Mounting (Optional) Cooling Fanless System Enclosure Metal Housing Operating 0~50° C (32~122° F) Temp.
-
Page 17: Package Contents
CHAPTER 1 INTRODUCTION 1.4 Package Contents Carefully remove the box and unpack EAC Mini EACIL20 IoT Gateway. Please check if all the items listed below are inside your package. If any of these items are missing or damaged contact us immediately. -
Page 18: Appearance
USER MANUAL CHAPTER 1 INTRODUCTION 1.5 Appearance This section includes front and rear side I/O ports location of the EAC Mini IoT Gateway. Front Side Rear Side - 16 -... -
Page 19: Dimensions
USER MANUAL CHAPTER 1 INTRODUCTION 1.6 Dimensions All dimensions shown in mm (millimeters). Unit without mounting bracket Standard With Expansion Module With 2 Expansion Modules Unit with mounting bracket - 17 -... -
Page 20: Led Indicators
USER MANUAL CHAPTER 1 INTRODUCTION 1.7 LED Indicators The EAC Mini IoT Gateway provides one HDD and one Power LED indicators located on the front for status monitoring. LED Type Status Description Power is on Power Power is off - 18 -... -
Page 21: Chapter 2: Hardware Installation
USER MANUAL CHAPTER 2 HARDWARE INSTALLATION HARDWARE INSTALLATION This chapter provides information on how to use external I/O and the installation of EAC Mini EACIL20 IoT Gateway hardware. - 19 -... -
Page 22: Connectors
The following sections give you information about EAC Mini standard connectors and pin assignments. 2.1.1 HDMI Connector Plug HDMI signal cable to the HDMI connector of the EAC Mini EACIL20, and plug the other end to the monitor. Pin Assignment and signal names for HDMI connector Pin №... -
Page 23: Usb Connector
USER MANUAL CHAPTER 2 HARDWARE INSTALLATION 2.1.3 USB Connector The EAC Mini EACIL20 provides two USB 3.0 connectors. Use USB 3.0 connector to connect external devices such as mouse or keyboard to the box computer. Pin № Pin № Signal Name... -
Page 24: Hardware Installation
4. Screw back the bottom cover. 2.2.2 External Antenna Installation Notice that external antenna is an optional feature of the EAC Mini EACIL20. To install external SMA antenna: 1. Remove the rubber cap on the SMA connector before installing the antenna. -
Page 25: Expansion Module Installation
CHAPTER 2 HARDWARE INSTALLATION 2.2.3 Expansion Module Installation Notice that expansion module is an optional feature of the EAC Mini EACIL20. To install expansion module: 1. Unscrew the three screws on the bottom cover. 2. Remove the I/O module from the 2 layer. -
Page 26: Connecting The Power
USER MANUAL CHAPTER 2 HARDWARE INSTALLATION 2.3 Connecting the Power The DC power supply connector of the EAC Mini IoT Gateway is on the front panel. The DC power input for the EAC Mini allows a voltage input range from 9 V DC to 30 V DC. -
Page 27: Chapter 3: Mounting
USER MANUAL CHAPTER 3 MOUNTING MOUNTING This chapter provides step-by-step mounting guide for all available mounting options. - 25 -... -
Page 28: Wall/ Desk Mount
The EAC Mini supports five types of mounting: wall and desk mounting by default, and optional VESA, DIN-rail, Pole mounting solutions. You can purchase mounting kit from Winmate as an optional accessory. 3.1 Wall/ Desk Mount L-shape mounting brackets for wall/ desk mounting are supplied with the EAC Mini. -
Page 29: Din-Rail Mount
USER MANUAL CHAPTER 3 MOUNTING 3.2 DIN-Rail Mount You can purchase DIN-Rail mounting kit from Winmate as an optional accessory. DIN-Rail Mounting Kit: Part Number: 821118551400 Mounting Instruction: 1. Fasten screws to secure DIN-rail mounting bracket to the EAC Mini. -
Page 30: Vesa Mount
USER MANUAL CHAPTER 3 MOUNTING 3.3 VESA Mount You can purchase VESA mounting kit from Winmate as an optional accessory. VESA Mounting Kit Part Number: 821118561001 Mounting Instruction: 1. Mark the location of the screw holes on the fixture (ex. wall). -
Page 31: Chapter 4: Insyde Uefi Bios Setup
USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP INSYDE UEFI BIOS SETUP BIOS Setup Utility is a program for configuration basic Input / Output system settings of the computer for optimum use. This chapter provides information on how to use BIOS setup, its functions and menu. -
Page 32: How And When To Use Bios Setup
USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP CHAPTER 4: INSYDE UEFI BIOS SETUP BIOS Setup Utility is a program for configuration basic Input / Output system settings of the computer for optimum use. This chapter provides information on how to use BIOS setup, its functions and menu. 4.1 How and When to Use BIOS Setup To enter the BIOS setup, you need to connect an external USB keyboard, external monitor and press Del key when the prompt appears on the screen... - Page 33 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP The following Keys can be used after entering the BIOS Setup. Function Help Exit Cursor ↑/ ↓ Select item Cursor ←/ → Select item F5/F6 Change values Enter Select submenu Setup defaults Save and Exit NOTE: You can press the F1, F2, F3, F4, –/+, and Esc keys by connecting...
-
Page 34: Bios Functions
USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2 BIOS Functions 4.2.1 Main Menu The Main menu displays the basic information about yoursystem including BIOS version, processor RC version, system language, time, and date. When you enter BIOS setup, the first menu that appears on the screen is the main menu.It contains the system information including BIOS version, processor RC version, system language, time, and date. -
Page 35: Advanced Settings
USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2 Advanced Settings Select the Advanced Tab from the setup menu to enter the advanced BIOS setup screen. You can select any of the items on the left frame of the screen to go to the sub menu for the item, such as CPU Configuration. - Page 36 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2.1 Boot Configuration Setting BIOS Setting Description Effect Option Windows/ Select the OS of your OS Selection Select OS Linux computer. - 34 -...
- Page 37 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2.2 GOP and IGD Configuration - 35 -...
- Page 38 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP BIOS Setting Description Setting Option Effect GOP Configuration Enable GOP Driver Enabled Use this item to will unload VBIOS GOP Driver enable or disable Disable It will load GOP Driver Disabled VBIOS IGD Configuration Use this item to Enables or disables...
- Page 39 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2.3 Advanced Configuration BIOS Setting Description Setting Option Effect Use this item to select PCI Express PCI Express Enter Opens submenu Configuration paramerters Use this item to change SATA Drives SATA Drives Enter Opens submenu paramerters...
- Page 40 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2.3.1 PCI Express Configuration BIOS Setting Description Setting Option Effect PCI Express Use this item to select PCI Express Enadbled/ Clock Gating PCI Express Clock Gating Clock Gating Disabled enable/ disable paramerters for each root port Use this item to select Select which...
- Page 41 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP PCI Express Root Port - 39 -...
- Page 42 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP BIOS Setting Description Effect Setting Option Disabled/ L0s/ PCI Express Active State Set the parameters of ASPM L1/ L0sL1/ Power Management setting ASPM Auto Disabled/ PCI Express L1 Substate Set the parameters of L1 Substates L1.1/ L1.2/ settings...
- Page 43 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2.4 SATA Drives - 41 -...
- Page 44 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP BIOS Setting Description Setting Option Effect The Chipset SATA Chipset-SATA controller supports the Enables/ Disables Enadbled/ Controller 2 black Internal SATA the Chipset-SATA Disabled Configuration ports (up to 3 GBb/s Controller supported per port) SATA Mode Determines how SATA AHCI...
- Page 45 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2.5 SCC Configuration BIOS Setting Description Setting Option Effect Enadble/ Disable SCC SD Card Configure SCC SD Enadbled/ SCC SD Card Support (D27:F0) Card Support settings Disabled Support SCC eMMC Configure SCC eMMC Enadbled/ Enadble/ Disable Support (D28:F0)
- Page 46 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2.6 USB/ XHCI/ XDCI Configuration Setting BIOS Setting Description Effect Option Configure USB USB/ keyboard/ mouse/ Enadbled/ USB BIOS Support BIOS Support storage support under UEFI Disabled settings environment Configure XHCI Enadbled/ Enadble/ Disable XHCI Pre- XHCI Pre-boot Pre-boot Driver...
- Page 47 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2.7 Miscellenaous Configuration Setting BIOS Setting Description Effect Option Configure High Enadbled/ Enadble/ Disable XDCI High Precious Precious Timer t Disabled Timer High Precious Event Timer settings Configure 8254 Enadbled/ Enadble/ Disable 8254 8254 Clock Gating Clock Gating Disabled...
- Page 48 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2.8 TXE and TPM Configuration Setting BIOS Setting Description Effect Option Configure Target fTPM/ Target TPM device Select fTPM or dTPM TPM device settings dTPM - 46 -...
- Page 49 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2.9 Thermal Configuration Parameters Setting BIOS Setting Description Effect Option Configure _CTR, _PSV, and _ACO automatically based on Enabled/ Automatic Thermal Set to Disabled for values recommended Disabled Reporting manual configuration in BWG’s Thermal Reporting for Thermal Management settings This value controls the...
- Page 50 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2.10 WDT Configuration Setting BIOS Setting Description Effect Option Enabled/ Configure WDT Enable/Disable WDT Disabled settings Check Hardware Hardware Monitor Press Enter Open sub-menu Monitor settings GPIO Group 0 Check GPIO Group 0 Press Enter Open sub-menu Configuration...
- Page 51 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP Hardware Monitor GPIO Group 0 Configuration Setting BIOS Setting Description Effect Option User can pull internal Push Pull/ Set Push Pull or Open Internal Resistance resistance push-pull/ Open Drain Drain open-drain Set the GPIO is input Input/ Set the GPIO is input Input/ Output Mode...
- Page 52 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.2.11 H2oUve Setup Setting BIOS Setting Description Effect Option Enable/ Disable Enable/ Disable Enabled/ H2oUve Support Interface for H2oUve Disabled H2oUve Support tool - 50 -...
-
Page 53: Security Menu
USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.4 Security Menu This section allows to configure and improve system, and set up some system features according to your preferences. Setting BIOS Setting Description Effect Option TrEE Protocol Select TrEE Protocol Select TrEE Protocol 1.0/ 1.1 Version... -
Page 54: Power Menu
USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.5 Power Menu Setting BIOS Setting Description Effect Option Check CPU CPU Configuration Press Enter Opens sub-menu Configuration 4.2.5.1 CPU Configuration - 52 -... - Page 55 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP Setting BIOS Setting Description Effect Option When a processor If bi-direction is enabled, thermal sensor trips Enabled/ Bi-directional external agents can drive (either core) , the Disabled PROCHOT# PROCHOT# to throttle the PROCHOT# will be processor driven...
- Page 56 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.5.2 System Power Options Setting BIOS Setting Description Effect Option Allows more than two Enabled/ Enable/ Disable Intel® Intel® frequency range to be Disabled SpeedStep (tm) SpeedStep (tm) supported Boot Configure Boot Select the performance Performanc Performance...
-
Page 57: Boot Menu
USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.3 Boot Menu - 55 -... - Page 58 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP Setting BIOS Setting Description Effect Option Dual / Configure Boot Type Select boot type to Dual, Boot Type Legacy/ settings Legacy or UEFI type UEFI Allows InsideH20 to skip Enabled/ Configure Quick Boot certain tests while booting.
-
Page 59: Exit Menu
USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.2.3.1 Boot Type Order 4.2.3 Exit Menu - 57 -... -
Page 60: Using Recovery Wizard To Restore Computer
USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 4.3 Using Recovery Wizard to Restore Computer Note: Before starting the recovery process, make sure to backup all user data. The data will be lost after the recovery process. Important: Before starting the recovery process, remove the PCI/ PCIe card and CFast card. -
Page 61: How To Enable Watchdog
To enable Watchdog, you need to download Winmate Watchdog utility. Find more information on Watchdog in “Watchdog Guide” that you can download from Winmate Download Center or File Share. Refer to the User Manual for more details. To enable watchdog in Watchdog AP follow the instructions below: 1. - Page 62 USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP 3. In Watchdog utility window set countdown time and periodically feed time, or disable watchdog. Example: Every 10 min watchdog will monitor the system, in case any error occurs the system will restart automatically when the countdown time reaches 0.
-
Page 63: Chapter 5: Driver Installation
USER MANUAL CHAPTER 5 DRIVER INSTALLATION DRIVER INSTALLATION This chapter provides instructions on how to install drivers on the EAC Mini IoT Gateway. - 61 -... -
Page 64: Chipset Driver Installation
USER MANUAL CHAPTER 5 DRIVER INSTALLATION CHAPTER 5: DRIVER INSTALLATION This chapter provides instructions on how to install drivers on the EAC Mini EACIL20 IoT Gateway. Notice that pictures in this example are for Windows 10 OS. 5.1 Chipset Driver Installation To install chipset driver: 1. - Page 65 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 3. Click Accept to agree to the license terms. 4. Check installation details and click Install. 5. The installation is complete, click Finish to exit installation window. - 63 -...
-
Page 66: Graphic Driver Installation
USER MANUAL CHAPTER 5 DRIVER INSTALLATION 5.2 Graphic Driver Installation To install graphic driver: 1. Open the driver CD and double-click on Graphic driver. 2. The system opens installation window, click Next to continue. - 64 -... - Page 67 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 3. Click Accept to agree to the license terms. 4. Check installation details and click Install. 5. Wait for the system to install the driver. - 65 -...
- Page 68 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 6. The installation is complete, click Next to continue. 7. Select Accept, and exit installation window. - 66 -...
-
Page 69: Txe (Trusted Execution Engine) Driver Installation
USER MANUAL CHAPTER 5 DRIVER INSTALLATION 5.3 TXE (Trusted Execution Engine) Driver Installation To install TXE (Trusted Execution Engine) driver: 1. Open the driver CD and double-click on TXE driver. 2. The system opens installation window, click Next to continue. - 67 -... - Page 70 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 3. Click Next to agree to the license terms. 4. Check installation details and click Next. 5. Wait for the system to install the driver. - 68 -...
- Page 71 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 6. The installation is complete, click Finish to exit installation window. - 69 -...
-
Page 72: Serial Io Driver Installation
USER MANUAL CHAPTER 5 DRIVER INSTALLATION 5.4 Serial IO Driver Installation To install Serial IO driver: 1. Open the driver CD and double-click on Serial IO driver. 2. The system opens installation window, click Next to continue. - 70 -... - Page 73 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 3. Click Accept to agree to the license terms. 4. Check installation details and click Install. 5. Click Next to continue. - 71 -...
- Page 74 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 6. Wait for the system to install the driver. 7. The installation is complete, click Finish to exit installation window. - 72 -...
-
Page 75: Lan Driver Installation
USER MANUAL CHAPTER 5 DRIVER INSTALLATION 5.5 LAN Driver Installation To install LAN driver: 1. Open the driver CD and double-click on LAN driver. 2. The system opens installation window. - 73 -... - Page 76 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 3. Click Next to continue. 4. Press Next to continue. 5. Press Next to continue. - 74 -...
- Page 77 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 6. Press Install. 7. Wait for the system to install driver. 8. The installation is complete, click Finish to exit installation window. - 75 -...
-
Page 78: Chapter 6: Technical Support
USER MANUAL CHAPTER 6 TECHNICAL SUPPORT TECHNICAL SUPPORT This chapter includes pathway for technical support and Software Development Kit (SDK). - 76 -... -
Page 79: Software Developer Support
You can download SDK, derivers and other document from Winmate Download Center Winmate File Share. Winmate Download Center http://www.winmate.com/ > Support > Download Center > Embedded Computing > EAC Mini EACIL20 6.2 Problem Report Form IoT Gateway Customer name: Company: Tel.: Fax: E-mail:... -
Page 80: Appendix A: Ordering Information
USER MANUAL APPENDIX A ORDERING INFORMATION ORDERING INFORMATION This section includes EAC Mini IoT Gateway ordering information. Appendix - 78 -... - Page 81 APPENDIX A: ORDERING INFORMATION EAC Mini EACIL20 IoT Gateway available in the following configurations: Model Name Configuration EACIL20-100-A432 Intel N3350, 4G RAM, 32GB eMMC, 2 x USB 3.0, 2 x GbE LAN, 1 x HDMI EACIL20-100-A432W10 Intel N3350, 4G RAM, 32GB eMMC, 2 x USB 3.0,...
- Page 82 NOTES _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________...
- Page 83 NOTES _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________...
- Page 84 Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, New Taipei City 24158, Taiwan, R.O.C Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Email: sales@winmate.com.tw Official website: www.winmate.com...
Need help?
Do you have a question about the EAC Mini EACIL20 and is the answer not in the manual?
Questions and answers