Gigaset 2010 Operating Instructions Manual page 62

14.8.98
Operating more than one handset
Excluding or reintegrating a handset from/into collective ringing
O
Selecting a handset for ring priority
O
Setting the number of rings for ring priority
52
KAP16.FM5
# 1
B
Start the setting procedure.
Enter the four-digit base code (factory default:"0000")
o
( page 19).
* 2 1
The current setting is shown on the display. handsets
which are in collective ringing mode are indicated by their
internal call numbers and excluded handsets are indica-
ted by a space:
:
n 21
P f
:
n 21
P f
B
Enter the internal call number of the desired handset
o
(1 to 6) and confirm with
collective ringing mode it is excluded. If it was previously
excluded it is reintegrated into the collective ringing.
# 1
B
Start the setting procedure.
Enter the four-digit base code (factory default:"0000")
o
( page 19).
* 2 2
The current setting is shown on the display:
:
n 22 1
P f
B
Enter the internal call number of the desired handset (1
o
to 6) and confirm with
# 1
B
Start the setting procedure.
Enter the four-digit base code (factory default:"0000")
o
( page 19).
* 6
O
The current setting is shown on the display:
:
n 6 3
P f
B
Enter the desired number of rings (two to nine) and con-
o
firm with
Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
(Example 1: handsets1,
1234
N
2,3,4 are in coll. ringing)
b
(Example 2: handset 3 is
N 12 4
b not in collective ringing)
B
. If the handset is already in
(Example: handset 1 has
N
ring priority)
b
B
.
(Example: 3 rings are set)
N
b
B
.