Lock Functions On The Handset; Activating/Deactivating The Handset Lock; Dss Number For Handset Lock - Gigaset 2010 Operating Instructions Manual

14.8.98

Lock functions on the handset

Lock functions on the handset

Activating/deactivating the handset lock

DSS number for handset lock

46
KAP14.FM5
You can lock your handset for outgoing external calls to
protect it against unauthorized use.
If a DSS number is stored on the handset, it can still be
dialed if the lock function is on. A preprogramed emergen-
cy number (
set is locked.
It is possible to accept calls on a locked handset.
8 1
B
Start procedure for switching on the lock.
or
8 0
B
Start procedure for switching off the lock.
Enter the handset PIN (factory default "0000 ").
o
( page 20).
B
Switch the handset lock on or off. If the handset is
locked, you will see a key on the display.
You can store one DSS number which can be dialed when
the handset is locked. The DSS number can be a number
where you can be reached in your absence.
Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
page 41) can also be dialed when the hand-
A DSS number must be stored before acti-
vating the handset lock.
You can lock the Gigaset 2010 for outgoing ex-
ternal calls ( page 41).
The DSS number must not be the same as a
barred number ( page 41).
The DSS number cannot be dialed from a locked
handset,
if "outward-restricted trunk access" is set
( page 45), or
if the Gigaset 2010 lock is activated
( page 45).
If the Gigaset 2010 lock is activated, it is only
possible to dial emergency numbers.
Exception: DSS number = emergency
number.