Gigaset 2010 Operating Instructions Manual page 5

14.8.98
Overview: Key functions and display symbols
uP zAH n -8 888888 c c
A
N
f b
Display Symbols (top line)
Display symbols (bottom line)
KAP00.FM5
All digits and characters are displayed on the top line, whi-
E F G H
le the symbols for various operating modes are displayed
on the bottom line.
u
Display after briefly pressing the signal key,
Manual dialing pause.
P
Exchange code (only used when connected to telephone
A
systems).
Main exchange code (only used when connected to tele-
H
phone systems ).
Memory empty.
z
n
Display of star key,
- Display of pound key,
c
Volume of incoming speech, level 2.
c c
Volume of incoming speech, level 3.
A
Indicates that the mobile unit is in save mode and is not
ready for dialing. Activated by pressing the
j
Battery symbol flashes for approximately 5 to 10 minutes
before the batteries are empty.
i
Batterie is 33% charged.
g
Batterie is 66% charged.
f
Batterie is 100% charged.
N
ON symbol. Activated by pressing the
bol flashes if the mobil unit is out of range of the base
station.
b
Phone symbol indicates that the mobil unit is in off-hook
mode. Activated by pressing the
E
Indicates that the dialing mode has been temporarily
switched from dial pulsing to DTMF signaling.
F
Indicates that an external call is in progress via the base
station.
G
Indicates that an internal call is in progress via the base
station.
H
Indicates that the mobile unit is locked.
A1
Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
*
key.
#
key.
c
key.
R
key.
B
key.
h
key. This sym-
A1