Table of Contents
Advertisement
3. Functional Structure
3-1. Water Supply Level
1) Water Supply Level
1 RESET
: It is the water level to start drainage. The spin cycle starts 30 seconds after the reset level is reached. It is
the minimum water level to start operating the heater.
2 HEATER OFF
: . It is the minimum water level to start operating the heater. The heater starts running only when the water
level is above this measure.
3 WASH 1
: Water level for Baby Care program
4 WASH 2
: Water level for Normal, Tub clean, QUICK15 or INTENSIVE program.
5 WASH 3
: Water level for INTENSIVE40 or INTENSIVE60 program.
6 WASH 4
: Water level for Delicate program.
7 WASH 5
: Water level for 'QUICK15 program's MAIN WASH'
8 LOCK OFF(Water level to unlock door)
: Water level to enable to open the door
9 LOCK ON(Water level to lock door)
: Water level to lock the door automatically due to the water in the tub.
0 Overflow Level
: Water level to start draining water due to overflow risk. The water supply is suspended and water is
drained to lower the level to the reset level if the overflow level is reached.
DWM30-999PG(영_SM).indd 19
19
16. 8. 23. 오전 10:10
Advertisement
Table of Contents
