Compliance to European
Union Directives
Installation and Wiring
This chapter tells you how to:
avoid electrostatic damage
determine the RTD module's chassis power requirement
choose a location for the RTD module in the SLC chassis
install the RTD module
wire the RTD module's terminal block
If this product has the CE mark it is approved for installation within the
European Union and EEA regions. It has been designed and tested to meet
the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in whole
or in part, documented in a technical construction file:
EN 50081-2
EMC – Generic Emission Standard, Part 2 – Industrial Environment
EN 50082-2
EMC – Generic Immunity Standard, Part 2 – Industrial Environment
This product is intended for use in an industrial environment.
Chapter
3
3–1