Battery - Siemens SL45 User Manual

8
Insert battery
• Insert battery at the bottom of the
n
phone and press inward until it
clicks into place
n
• Switch off the phone before you
remove the battery.
• Unlock battery
Charge battery
• The battery is not fully charged
when delivered, so:
n
• Interconnect the socket and the
Sync Station
power supply.
• Insert the phone into the Sync
o
Station and press downward
until it engages. The contact mes-
sage is displayed (alternatively:
plug in power supply directly to
the phone).
o
.
o
o
, then remove
o
n
with the plug-in

Battery

Charging
The charger heats up when used for long
periods. This is normal and not dangerous.
An empty battery is fully charged after
about 2 hours. Charging is only possible in
an ambient temperature of 5°C to 40°C
(the charge icon flashes as a warning when
the temperature is 5°C above/below).
n
.
Usage time
A fully charged battery provides 60 to 170
hours of standby time or 1½ to 4 hours of
talk time. The standby times/talk times are
average values; the actual values depend
on the operating conditions (see table
below).
Charge level display:
Fully
charged
A beep sounds when the battery is nearly
empty.
Operation
carried out
Calling
Playing music
Display
backlight*
Network search 1
*Key input, games, organizer etc.
The voltage indicated on the
Sync Station must not be
exceeded.
When charging is in progress.
End of charging
Time Decrease of
(min) standby time
1 30 - 60 min.
30 20 - 30 h.
½ 30 min.
5 - 10 min.
Empty