During Calls; Headset; Car Use; Irda - Siemens SL45 User Manual

64

During calls

Î Setup Î
During calls Î
then select a function:
Call waiting
If you are registered for this service,
you can check whether it is set and
activate or deactivate it (see also
p. 15).
Conceal ID
When you make a call, your number
appears on the recipient's display
(depending on the Service Provider).
To suppress this display, you may
activate "Conceal ID" mode for the
next call or all subsequent calls. You
may need to register separately with
your Service Provider for these
functions.
Minute Beep
During a call you hear a beep after
every minute as a reminder of the
time elapsed.

Headset

Î Setup Î
Headset
Calls are automatically accepted
after the 3rd ring when the stereo
headphones are connected. You
should continue wearing the
headphone.
Setup
Switch to handset during a call (if the phone
is connected to the hands-free kit).

Car use

Î Setup Î In the car
If the phone is connected to an
original Siemens car kit, the
following functions can be activated/
deactivated:
Auto Answer
Calls are accepted after the 3rd ring
if the phone is connected to an
original Siemens car kit. Depending
on the setup, the ignition may need
to be switched on.
Factory default: On.
Aut. power off
The phone is powered by the car's
power supply. The time between
switching off the ignition and
deactivation of the phone can be
adjusted. Factory default: 2 hours.
Automatic settings:
Permanent illumination: Switched on
Auto key lock: Switched off

IrDA

Activate/deactivate infrared data
transmission.
Activate and deactivate.
Indication on the display.