Siemens SL45 User Manual page 78

76
Problem
Voice mail does not
work.
Message " ".
Message cannot be
sent.
Function cannot be
set.
Charge counter does
not work.
PIN error
Phone code error
Service Provider code
error
Too few/too many
menu entries
No fax possible
Damage
Severe shock
Phone exposed to
moisture
Troubleshooting
Possible cause
Call diversion not set
Message store full
Service Providers do not support this
service.
Phone number of the Service Centre is
not set or is wrong.
SIM card contract does not support this
service.
Service Provider overloaded
Addressee does not have
a compatible phone.
Not supported by Service Provider or
registration required.
Charge pulse not transmitted.
Three wrong entries
Three wrong entries
No authorisation for this service.
Functions may have been added or re-
moved by your Service Provider via the
SIM card.
Incorrect settings in the PC.
No authorisation for this service.
Wrong Windows infrared driver.
Remove battery and SIM and insert them again. Do not dismantle the phone.
Remove and dry the battery and SIM card. Dry immediately with a cloth; do not use
heat. Dry connector contacts thoroughly. Stand unit upright in a current of air. Do
not dismantle the phone.
Possible remedy
Set call diversion
(see p. 55).
Delete a message to make room
(see p. 43).
Check with your Service Provider.
Set Service Centre (see p. 45).
Contact your Service Provider.
Repeat message.
Check.
Contact your Service Provider.
Contact your Service Provider.
Enter the MASTER PIN (PUK) provided with
the SIM according to the instructions. If
MASTER PIN or PIN has been lost, contact
your Service Provider.
Contact Siemens Service (see p. 73).
Contact your Service Provider.
Check with your Service Provider.
Check settings, see p. 68.
Contact your Service Provider.
Replace Windows infrared driver/contact
your PC supplier.