Time/Charge - Siemens SL45 User Manual

54
You can display the charge details
and duration of calls as you speak ,
as well as setting a unit limit for
outgoing calls.
Î Time/Charge
After you have made the charge
detail settings you can display the
call duration/charge details for the
following call types:
Last call
All calls out
All calls in
Select a call type.
Display the data.
When displayed, you may do the
following:
Clear display.
End display.
Charge settings
Set the parameters on the display.
Charge rate
(PIN 2 needed)
Enter the charges per unit/period.
Enter the currency in which charge
details are to be shown.

Time/Charge

Limit
(PIN 2 needed)
Special SIM cards allow you or the
Service Provider to define a credit /
period after which the phone is
blocked for outgoing calls.
Then confirm the credit or reset the
counter. The display of Prepaid
cards may vary depending on
Service Provider.
All Calls
Displays the call duration/charges
for all calls.
Incoming calls
Displays the charges for incoming
calls if these are billed separately.
Auto display
Call duration and call charges are
displayed after each call.
Enter the number of units.