Setup - Siemens SL45 User Manual

Setup

You can create different
"transmission profiles" for different
uses. A profile is selected before
text entry for the SMS.
Î Messages Î SMS Î
Setup
The list of available profiles is
displayed.
Select profile.
Depending on the situation different
functions are available:
New Create a new profile.
Delete Delete the profile (only
if not
Set as default Set the profile as the
default profile.
Rename Rename the profile.
The list of available settings ap-
pears.
Service Centre
Enter or change the phone numbers
of Service Centres as supplied by
the Service Provider.
Recipient
Enter the standard recipient for this
transmission profile or select from
the Addressbook.
Message (SMS)
Set as default).
Message type
The message type is re-
Variable
quested for each mes-
sage.
Standard Normal SMS message.
text
Telex Transmission via SMS.
Fax Transmission via SMS.
Transmission via SMS.
Email
X400 Transmission via SMS.
Define a new message
Own va-
lue: type.
Validity period
Select the period in which the
Service Centre tries to deliver the
message:
Maximum*, Own
hour, 12 hours, 1
* Maximum period that the Service Provider
permits.
Status report
You are given confirmation of the
successful or unsuccessful delivery
of a sent message. This service may
be subject to a charge.
Direct reply
The reply to your message is
handled via your Service Centre
(info from your Service Provider).
value:, Variable, 1
day, 1 week
45