Setup Connection To Control Box - REAC RCB15 User Manual

And on the desktop:
Or directly on the hard drive, where it has been installed:
To start the installed program, select the program in the program start menu, or double click on the
program icon on the desktop, or double click on the program in the programs folder on the hard disk.

3.3 Setup connection to control box

A regular USB cable (A-B type) is used between the USB connector in the control box and your PC.
The cable shall be inserted into the USB jack connector, see chapter 2.7.
When connecting a control box to a PC for the first time, the PC needs to get and install drivers to be able
to handle the new control box. It is recommended to be connected to the Internet while doing this, then it
all will be made automatically.
This will take a while, in meantime the system will inform that it is working, using some symbol and/or
some messages down here:
11