Pc Tools; Introduction; Get Started - REAC RCB15 User Manual

3 PC tools

3.1 Introduction

RCB20 and RCB25 have an USB-interface to easily connect to the REAC Service Toolbox (RST10)
and/or REAC Usage Tracking Tool (RUT10).
RST10 is a toolbox for maintenance and service. It can be used to control configurable settings such as
individual current limits and start- and stop ramps, to perform common service tasks, and to monitor
system behavior. Engineers might find it useful when evaluating application solutions. Service technicians
can use the tool for regular maintenance tasks as well as for some in field troubleshooting.
In addition to RST10 REAC also provides RUT10, which is a usage tracking tool, aimed for administrators
and managers who want to look up information relevant for evaluation and optimization usage of their lifts.
The tool has a user-friendly interface showing basic summaries of lift usage, battery level and additional
info, and is intended to be useful also for non-tech personnel. It also has the ability to export usage data,
which can be analyzed in other tools, for example in Microsoft Excel®.

3.2 Get started

The PC tools are acquired from REAC sales. For more information see chapter 5.8.
System requirements are stated in the technical datasheet for each PC tool.
PC tools from REAC can be run in two modes:

Portable version: Run directly from a USB memory or similar

Installed version: Installed on the PC. An icon will show up in the start menu and/or as a program
icon on the desktop.
To run the portable version double click on the file called "portable" and it will start up, ready to use.
5
For single use situations or when there are restrictions or limitations in installation rights on the computer.
5
.
9