Setting The Walk And Talk Mode - Siemens Gigaset SL 740 Operating Manual

Operating more than one handset
Changing previously set external "call
to" numbers
¢ ¢
v í
Room Monitor
s
Scroll to the Call to: line.
Press the display key.
Edit
X
Delete existing number.
Enter the external destination number:
~
Enter the new number.
©
Press display key to open
menu.
Save Entry Select and press
is stored.
You can also enter an internal number as
the "call to" number:
handset) .
OK
Continue as described on page 43 starting
with step 4.
Changing a previously set internal
"call to" number
¢ ¢
v í
Room Monitor
s
Scroll to the Call to: line.
Press the display key.
Edit
Press the display key to
Yes
confirm the prompt.
Press the display key. The input
Edit
field for the phone number is
opened.
Enter an external number as the "call to"
number:
~
Enter number.
©
Press display key to open
menu.
Save Entry Select and press
is stored.
You can also enter an internal number as
the "call to" number:
handset) .
OK
Continue as described on page 43 starting
with step 4.
44
. The entry
OK
¢
s (Select
INT
. The entry
OK
¢
s (Select
INT
Deactivating the room monitor
remotely
Take the call from the room monitor and
press the 9 ; keys. The room monitor
function will deactivate around
90 seconds after the call ends. After this,
the room monitor will make no further
calls. The other room monitor functions
on the handset (e.g. no ringer) will remain
activated until you press the display key
on the handset.
To reactivate the room monitor function
with the same telephone number, you
must turn on the activation again and save
with .
Save

Setting the Walk and Talk mode

The Walk and Talk function allows two
handsets to communicate with each other
no matter how far they are from the base
station.
Example: You go on holiday and take two
handsets with Walk and Talk functionality
with you. Set the Walk and Talk function
on both handsets.
Precondition:
u
Both handsets have been registered to
the same base station or
u
Both handsets are registered to
different base stations and both are set
to Best Base (p. 41) or
u
One of the handsets is not registered to
any base station and the registered
handset is set to Best Base or
u
Neither handset is registered to a base
station.
Please remember:
u
The maximum range between
handsets in Walk and Talk mode is
300 metres outdoors.
u
The handsets cannot be reached by
incoming calls.
u
Handset operating times are severely
curtailed in Walk and Talk mode.
Off