Text Messages To Pabxs; Sms Error Handling - Siemens Gigaset SL 740 Operating Manual

SMS (text messages)

Text messages to PABXs

u
You can only receive a text message
when the Calling Line Identification is
forwarded to the extension of the PABX
(CLIP). The CLIP of the phone number
of the SMS centre is evaluated in your
Gigaset.
u
You may have to prefix the number of
the SMS centre with an access code
(this depends on your PABX). You can
store the access code in your base
station.
If in doubt, you can test your PABX by
sending a text message to your own
number once with and once without
the access code before the number of
the SMS centre.
u
When you send messages, your sender
number may be sent without your
extension number. The recipient
cannot reply to you directly in this case.
Text messages can only be sent and
received through ISDN exchanges with
the MSN number assigned to your base
station.
Activating/deactivating SMS functions
v
Open menu.
OIO2L
Enter digits.
Q
Deactivate SMS function.
OK
or
1
Activate SMS function (factory
OK
setting).
28

SMS error handling

Error codes when sending text messages
E0 Calling Line Identification
permanently withheld (CLIR).
Calling Line Identification is not
enabled.
FE Error occurred during message
transfer.
FD Connection to SMS centre failed.
Text messages cannot be sent or
received if the number of an SMS
centre is missing or incorrectly
stored. Check that the number of the
SMS centre has been correctly stored.
Self-help with error messages
The following table lists possible errors
and their causes together with suggested
solutions:
You cannot send messages.
1. You have not requested the CLIP service
(Calling Line Identification Presentation).
£
Ask your network provider to enable
the feature.
2. Message transfer was interrupted (e.g. by
a call).
£
Re-send the message.
3. No number or an invalid number is
entered for the SMS centre activated as
the send centre.
£
Enter phone number (p. 27).
You receive a message whose text is
incomplete.
1. Your phone's memory is full.
£
Delete old messages (p. 23).
2. The second provider has not yet sent the
rest of the message.