Internal Listening In On An External Call; Changing The Name Of A Handset; Changing A Handset's Internal; Number - Siemens Gigaset SL 740 Operating Manual

Operating more than one handset
Internal listening in on an
external call
You are conducting an external call. An
internal party can listen in on this call and
also take part in the conversation. All the
parties are made aware of this by a signal
tone.
Precondition: The Listening In function is
activated.
Activating/deactivating internal
listening in
¢ ¢ ¢
v Ð
Base
¢
Listening In
~
Enter system PIN (p. 52) and
press
OK
a
Long press (idle status).
Internal listening in
In use is shown in your handset display.
You would like to listen in on the existing
external call.
c
Press and hold the talk key.
You can now listen in on the
call. All parties hear a signal
tone.
Ending listening in:
a
Press the end call key (signal
tone).
If the first internal party presses the end
call key a, a signal tone sounds. The
handset that is listening in is still
connected to the external party however.
42
Add. Features
(‰ = on).
Changing the name of a
handset
During registration, the names "INT 1",
"INT 2" etc. are assigned automatically.
You can change these names. The name
can be up to 10 characters long. The
changed name is displayed in the list of
every handset.
u
Open list of handsets.
s
Select handset.
Press the display key.
Edit
~
Enter name.
Press the display key.
Save

Changing a handset's internal

number

A handset is automatically assigned the
lowest unassigned number when it is
registered. If all the numbers have been
assigned, number 6 is overwritten
provided the handset is in idle status. You
can change the internal number of all
registered handsets (1–6).
u
Open list of handsets.
v
Open menu.
Edit H/Set No.
Select and press
handsets is displayed.
s
The current number flashes.
Select a handset.
~
Enter the new internal number
(1–6). The handset's old
number is overwritten.
Press the display key to save
Save
the entry.
a
Long press (idle status).
You will hear the error tone if you assign
an internal number twice (a falling tone
sequence). Repeat the process with an
unused number.
. The list of
OK