Setting The Walk And Talk Mode - Siemens Gigaset S440 User Manual

Changing previously set internal
destination number
¢ ¢
v í
Room Monitor
s
Jump to the
Press the display key.
§Edit§
Press the display key to con-
§Yes§
firm the prompt.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 36).
¤
Save changes (page 11).
Deactivating the room monitor
remotely
Important: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Take the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings on the handset (e.g. no ring-
tone) will however remain activated until
you press the display key
set.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with (page 36).
§Save§

Setting the Walk and Talk mode

The Walk and Talk function allows two
handsets to communicate with each other
no matter how far they are from the base
station.
Example: You go on holiday and take two
handsets with Walk and Talk functionality
with you. Set the Walk and Talk function
on both handsets.
line.
Call to:
on the hand-
§Off§
Important:
One of the following requirements must
be met.
u
Both handsets are registered to the
same base station.
u
Both handsets are registered to differ-
ent base stations and both are set to
(page 33).
Best Base
u
One of the handsets is not registered to
any base station and the registered
handset is set to
u
Neither handset is registered to a base
station.
Please note:
u
In Walk and Talk mode, the range
between the handsets is a maximum of
300 m in the open.
u
The handsets can no longer be reached
by incoming calls.
u
The Walk and Talk mode severely
reduces the handset operating times.
u
The Walk and Talk mode is retained
even when you switch your handset off
and back on.
Activating Walk and Talk mode
¢ ¢
v í
Walky-Talky
If, when you are in Walk and Talk mode,
you press the talk key c or handsfree
key d, the call will go to all the hand-
sets that are in Walk and Talk mode. The
connection is made with the first handset
to answer the Walk and Talk call.
u
The loudspeaker volume and advisory
tones are set in exactly the same way as
if your handsets were in range of the
base station (page 41).
u
"Activate/deactivate ringtone"
(page 42) and "Activate/deactivate key-
pad lock" (page 8) are available in Walk
and Talk mode.
u
To open the menu, press the display
key ©.
Using several handsets
Best Base.
37