Band Selection - Siemens Gigaset 200 User Manual

94 Settings
Create/change entry:
or select an existing entry,
<Empty>
then select a new service
provider in the list and
confirm.
Record new service provider (last en-
try in the list):
Furth.network
Select, enter the provider
data and save it.
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a different
network. This can change when the tele-
phone is next switched on or if another net-
work is selected manually.

Band selection

Select either GSM 900, GSM 1800 or
GSM 1900. Make sure that your ser-
vice provider supports the selected
band.
Fast search
When this feature is active, network
reconnection is speeded up (standby
time is reduced).
User group
Depending on your service provider,
you can create groups with this ser-
vice. These can have access to inter-
nal (company) information, for ex-
ample, or special rates apply. The
details can be clarified with your ser-
vice provider.
Active
Activate/deactivate feature. "User
group" must be deactivated for nor-
mal phone use.
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are ob-
tained from your service provider.
All outgoing
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
b
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network
configuration).
b