Getting Started; Inserting The Sim Card/Battery - Siemens Gigaset 200 User Manual

Getting started

Inserting the SIM card/
battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
Additional information
Please switch off your phone before re-
moving the battery!
1.8-V and 3-V SIM cards are supported.
Please contact your service provider if you
have an older card.
SIM card problems .....................page 120
• Press and hold down the catch
then push cover towards the front
in the direction indicated by the
2
arrow .
1
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then press the
SIM card slightly to push it in
1
2
3
(ensure that the chamfered corner
is in the correct position).
• Insert the battery sideways into
the phone
5
wards
4
,
• To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
• Place the battery cover, then push
it towards the front
clicks into place.
Getting started
3
4
, then press it down-
until it engages.
5
6
, until it
6
9