Minute Beep - Siemens Gigaset 200 User Manual

84 Settings
All calls
All calls are forwarded.
Icon in the top line of the
display in standby mode.
Ç
Not reachable
Forwarding occurs if phone is
switched off or out of range.
No reply
A call is only forwarded after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5-second intervals.
Busy
Forwarding occurs if a call is in
progress. If
Call waiting
(page 83), you will hear the call
waiting tone during a call (page 25).
Receiving fax
Fax calls are forwarded to a number
with a fax connection.
Receiving data
Data calls are forwarded to a number
with a PC connection.
b
is activated
b
b
Additional information
Note that the forward is stored in the net-
work and not in the phone (e.g. when the
SIM card is changed).
Reactivate forwarding
The last forwarding has been stored.
Proceed as with "Set forwarding". The
stored phone number is displayed.
Confirm number.
Call screening
Only calls from phone numbers that
are in the Phonebook/Addressbook
or in a group are signaled. Other calls
are only displayed.
Any key
Incoming calls can be accepted by
pressing any key (except for

Minute beep

During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
b
).
B