Band Selection - Siemens M56 User Manual

M56 Barracuda long, am english, A31008-H6350-A40-1-4A19 (28. July 2003,
Your service provider is displayed:
Display list of preferred
§List§
networks.
Create new entry:
• Select empty line, press §Entry§,
then select another entry from the
list of service providers and con-
firm.
Change/delete entry:
• Select entry, press
select another entry from the list
of service providers and confirm or
press §Clear§.

Band selection

Select either GSM 900, GSM 1800 or
GSM 1900.
Fast search
When this function is active, net-
work reconnection is speeded up
(and standby time is reduced).
Setup
then
§Change§
§Menu§ Network
Select function.
User group
Depending on the service provider,
you can create groups with this ser-
vice. These can have access to inter-
nal (company) information, for
example, or special tariffs apply. The
details can be clarified with your ser-
vice provider.
Active
Activate/deactivate function. "User
group" must be deactivated for nor-
mal phone use (phone code, p. 22).
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
Outgo. access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Preferred grp
If activated, only calls within this
standard user group can be made
(depending on the network configu-
ration).
87