Siemens Gigaset 200 User Manual page 90

• Access profiles have already been
created by your provider. Then se-
lect and activate profile.
• The access profiles must be con-
figured manually. In this case, you
will receive the necessary data
from the service provider or via
the "Setting Configurator" at
(page 119):
www.siemens.com/
mobilephonescustomercare
Select profile
Select the profile.
I
Confirm selection.
C
Set profile
Select the profile.
I
§Options§
Open menu.
Open the selection.
§Edit§
Select
GPRS
I
Select service and enter
§Edit§
data (see below).
Save settings.
§Save§
settings, and/or
CSD
settings.
CSD settings
(Circuit Switched Data)
Dial-up
Enter ISP number.
number:
Call type:
Select ISDN or analog.
Login:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS 1 (opt.):
(optional).
DNS 2 (opt.):
GPRS settings
(General Packet Radio Service)
You can only start to use GPRS once
you have activated GPRS on your
phone (page 88).
APN:
Login:
Password:
DNS 1 (opt.):
DNS 2 (opt.):
Settings
Enter service provider
address.
Enter login name.
Enter password (shown
as a series of asterisks).
(optional).
89