System Events - MONI LOG EnDal smart Instruction Manual

EnDaL smart
4 . 3 . 4 S y s t e m e v e n t s
The system events show events that concern the status and the operating behaviour of the device.
Possible errors in the hardware are also recorded. The display field for system events is normally
hidden and can be shown by activating the option "Extended diagnosis" in the menu „Settings".
The following system events can occur:
Turned on:

 Hour counter:
 Device configured:
 Thresholds configured:
 Turned off:
Time synchronised:

USB (dis)connected:

 GPS active:
 Hardware inactive:
 Failure:
Figure 13: Display of the system events of a
PC SOFTWARE – MONI LOG® ANALYZER
the device had been switched on
24 h of operating time of the device are expired
the device had been configured.
alarm events/thresholds were activated/changed
the device had been switched off
the system time of the device had been configured
the event was caused by activities via the USB interface
device searches GPS-coordinates
parts of the device had been deactivated
an internal error occurred please contact the manufacturer
- 29 -
EnDaL smart