Meaning Of The Led Statuses - MONI LOG EnDal smart Instruction Manual

DEVICE DESCRIPTION OF MONI LOG® ENDAL SMART
If the device is provided with a switch-on/switch-off code, it can only be deactivated via the
software. In order to signalise this, the active-LED begins to light up and the alarm-LED begins to
flash when the On/Off key is pressed for a longer time (~1 second). In order to switch off the
device, connect it to a PC and start the
recognised that the device is password-protected. At this point you are requested to enter the
device password. Via the tab "Configuration" and the button "Code word configuration", you
can switch off the device now.
Explanations for the configuration of the switch-on/switch-off code can be found in chapter
4.3.11 in the paragraph „Password configuration"
3 . 3 M E A N I N G O F T H E L E D S T A T U S E S
LED What?
Green illuminated
(active)
Green flashing
(active) &
Red
(alarm)
Green illuminated
(active)
Green illuminated
(active)
Green flashing
(active)
Green illuminated
(active)
Green
flashing
(active)
Green & illuminated
Red
How? When?
~ 1 second switching on
max. 20 seconds switching on
1x flashing key pressed
briefly briefly
~ 1 second USB active
irregularly USB active
0.1 - 8 seconds device active
regularly device active
4 seconds USB configuration
permanently
- 12 -
Analyzer. When reading out the device, it is
2
nd
L
E
D
?
- device switched on
Green
a
Red
&
via software is expected
- device is active
- USB
connected/disconnected
- USB data transmission
- recording of
shock, synchronous or
event data
searching for
GPS coordinates
Green memory is deleted
Red
&
EnDaL smart
Meaning
switch-on
password