MONI LOG EnDal smart Instruction Manual page 29

EnDaL smart
Shock release counter:

Device name:

Notes field:

Serial number:

 Start of recording:
Stop of recording:

Synchronous interval: set interval, at which synchronous data are recorded (temperature,

 System time:
Commissioning:

Operating hours:

 Battery voltage:
 Battery level:
Zero position inclination:

GPS tracking:

 Last GPS position:
GPS points:

Firmware version:

Hardware version:

number of the releases by the release threshold of the
device. Shocks that will not reach the set recording thresholds
(shock magnitude, shock strength and shock duration) are rejected
again. Thus, this value is purely informative and signalises that
events have been detected by the device.
device designation by the user (freely selectable)
field for programming a note in the device (mailbox)
serial number of the device (unchangeable)
beginning of the measurement recording by user or by measurement
programme
end of the measurement recording by user or by measurement
programme
humidity, pressure, inclination, GPS).
current time at the PC, with which the device had been read out.
date and time of the first commissioning
total operating time of the device since commissioning at the
manufacturer
voltage of the device battery
current percentage battery reserve (estimated device runtime in
hours)
spatial position of the device when the recording starts
set interval, for the determination of the current GPS position
last determined GPS position with deposited link to Google Maps
number of the successfully determined GPS position data
current firmware version of the device
current Hardware version of the device
- 27 -
PC SOFTWARE – MONI LOG® ANALYZER