Usb Driver - MONI LOG EnDal smart Instruction Manual

EnDaL smart
4 . 1 . 2 U S B d r i v e r
If there are problems with the installation of
For the installation of the USB driver, the following points must be observed:
You need administrator rights to update a driver.

The figures may differentiate from the view of your device manager.

There may be a differentiating system language.

The driver must be set only once on your computer in case of a successful installation.

Installation process
1. Connect the
When connecting the device, the green active-LED lights up. After the LED has gone out,
the USB device is ready.
2. Open the folder of the included CD and execute the file "USB-driver-install.exe" as
administrator. (via right-click)
3. Follow the instructions until the installation is finished. Subsequently, you can read out the
EnDaL smart using the software
Note:
the driver for the USB connection manually.
EnDaL smart by means of the included USB cable to your PC.
- 19 -
PC SOFTWARE – MONI LOG® ANALYZER
Analyzer, it may be necessary to install
Analyzer.