Activating/Deactivating Auto Talk; Resetting The Handset To The Factory Setting - Siemens 4010 Operating Instructions Manual

Gigaset 4010 Comfort, GBR, A31008-G4010-B102-1-7619
Press keys:
H/Set Settings
Auto Answer
H/Set Settings
Reset Handset

Activating/deactivating Auto Talk

When this function is activated you can remove the
handset from the charging unit/base station without
pressing the handset key
setting).
Open the menu.
Select the menu item and confirm.
Select the function and press
te it ( = function on).
Resetting the handset to the factory
setting
The directory, the network access list and the caller list
are not deleted when you reset the handset. Registra-
tion at the base station is not affected.
Open the menu.
Select the menu item and confirm.
Select the menu item and confirm.
Confirm check prompt.
Function
Handset volume (see page 68) 1
Ringer volume (see page 69)
Ringer melodie (see page 69)
Auto talk (see page 71)
Battery low beep (see
page 70)
Room monitor level(see
page 68)
Room monitor level (see
page 63)
Time control (see page 69)
Display language (see
page 68)
Redialling list
(see page 20)
mobilt.fm 11.6.01
to accept a call (factory
to activate/deactiva-
Factory setting
5
1
on
on
5
high
off
local
deleted
71