Energy Saving Tips; Connecting The Cooler - Dometic CF SERIES Operating Manual

Operation
7.2

Energy saving tips

•
Choose a well ventilated installation location which is protected against direct
sunlight.
•
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
•
Defrost the cooling device once a layer of ice forms.
•
Avoid unnecessary low temperatures.
7.3

Connecting the cooler

AC extension cord
!
WARNING!
Because of potential safety hazards under certain conditions, the
manufacturer strongly recommends against the use of an extension
cord. However, if you must use an extension cord, it is absolutely
necessary that it be a UL-Listed (in the United States) or a CSA-Listed
(in Canada) appliance extension cord, with 10 A (minimum), 120 V
electrical ratings.
!
CAUTION!
•
Under no circumstances should you attempt to splice extension
cord wires.
•
Do not use power strips or 2-way splitters.
•
Always unroll or uncoil an extension cord to avoid heat retention and
possible melting.
➤ Select a UL/CSA listed 120 Vw/≥ 10 A outdoor use extension cord according to
the following table:
120 Vw
Wire conductors
AWG
14
Maximum cord length
10 ft. (3 m) 25 ft. (7.6 m) 50 ft. (15.2 m)
3
14 (1.6 mm²) 12 (2 mm²)
3 3
12 (2 mm²)
CoolFreeze
100 ft.
(30.5 m)
3
12 (2 mm²)
EN