Aux-In Operation; System; Language; Factory Reset - TechniSat DIGITRADIO 1980 Instruction Manual

> In case of malfunction due to electrostatic discharge, just reset the product
(reconnect of power source may be required) to resume normal operation.

10 AUX-IN OPERATION

This unit has provided special AUX-IN jack, through this jack other audio sources can
be connected to this unit and be amplified.
1. Press STANDBY/FUNC. button, AUX mode shown on the display.
2. Connect the audio cable into the AUX-IN jack and the other end connect
to the AUDIO OUT jack of the external audio source. The unit will change to
AUX mode automatically.
3. Adjust the volume of the main unit to your desired level.
4. Press PLAY of the external audio source (eg. MP3 player) to start playback.

11 System

The system setting allows you to select display languages, reset to factory settings
and view the software version.

11.1 Language

To select language for display messages from: Deutsch, English, Dansk, Français,
Italiano, Norsk, Suomi, Svenska.
> Press the STOP/MENU button to enter menu selection, rotate the tuning
control or press the
press the PLAY/PAUSE/SELECT/SCAN button to enter, select "Language"
then rotate the tuning control or press the
desired language to be displayed, then press the PLAY/PAUSE/SELECT/SCAN
button to confirm.

11.2 Factory reset

Factory reset can help to clear all user defined settings, replacing them with the
original default values, including the DAB station list and preset stations.
> Press the STOP/MENU button to enter menu selection, rotate the tuning
control or press the
press the PLAY/PAUSE/SELECT/SCAN button to enter, select "Factory reset"
then rotate the tuning control or press the
or NO option, then press the PLAY/PAUSE/SELECT/SCAN button to confirm.

11.3 Software version

This displays the current software version.
> Press the STOP/MENU button to enter menu selection, rotate the tuning
control or press the
press the PLAY/PAUSE/SELECT/SCAN button to enter, select "SW version"
then press the PLAY/PAUSE/SELECT/SCAN button to view the current
software version.
or button to select the "System" option and
or button to select the "System" option and
or button to select the "System" option and
or button to choose the
or button to choose YES
EN
FR
IT
NL
NW
DK
PL
CZ
SK
15