Kirisun PT2208 Manual
  1. Manuals
  2. Brands
  3. Kirisun Manuals
  4. Portable Radio
  5. PT2208
  6. Manual
Kirisun PT2208 Manual

Kirisun PT2208 Manual

Hide thumbs Also See for PT2208:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
Enlarged version
We are grateful you have chosen
for your
land mobile application. We believe this easy to use
transceiver will provide dependable communication
to keep personal operating at peak efficiency.
Transceiver incorporates the latest and
advanced technology, so you will be pleased with
this product quality and features .
MODELS COVERED BY THIS MANUAL
PT2208/3208
Notice: this radio is intended for use in occupational
/controlled conditions , where users have full knowledge
of their exposure and can exercise control over their
exposure to meet FCC limits. This radio device is NOT
authorized for general population , consumer , or any
other use .
PRECAUTIONS
Please observe the following precautions to prevent
fire, personal injury, and transceiver damage.
Do not operate your transceiver while taking on fuel,
or not while parked.
Do not expose the transceiver for a long period to
direct sunlight, nor places the transceiver close to
heating appliances.
Do not place the transceiver in excessively dusty
areas, humid areas , not on unstable surfaces.
° ² È « Ð Ô £ º Ê ¹ Ó Ã Õ ß ¶ Ô Ê ¹ Ó Ã ¶ Ô ½ ² » ú µ Ä Ò » ° ã Î £ Ï Õ Ð Ô µ Ä Á Ë ½
Do not modify this transceiver for any reason.
Refer service to qualified licensed or certificated
technician only.
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PT2208 and is the answer not in the manual?

Questions and answers

Related Manuals for Kirisun PT2208

Summary of Contents for Kirisun PT2208

  • Page 1 . MODELS COVERED BY THIS MANUAL PT2208/3208 Notice: this radio is intended for use in occupational /controlled conditions , where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits.

  • Page 2: Table Of Contents

    CONTENTS UNPACKING AND CHECKING EQUIPMENT Carefully unpack the transceiver.We recommend Unpacking and checking equipment..... that you identify the items listed in the following Supplied accessories........table before discarding the packing material. If any damage has occurred during shipment, file a Preparation claim with the carrier immediately .

  • Page 3: Preparation

    PREPARATION CHARGE THE BATTERY INSTALLING /REMOVING THE Match the four grooves of Plug the AC adaptor cable the battery pack with the ½ « µ ç ³ Ø µ Ä Ë Ä ¸ ö ° ¼ ² Û ¶ Ô × ¼ ¶...

  • Page 4: Installing The Antenna

    INSTALLING ANTENNA INSTALLING THE OPTIONAL SPEAKER /MICROPHONE Screw the antenna into the connector on the top of the transceiver by holding Insert the speaker the antenna at its base and /microphone plugs turning it clockwise until into the Speaker secure. /Microphone jacks.

  • Page 5: Getting Acquainted

    GETTING ACQUAINTED MONITOR BUTTON Press the button for closing the SQUELCH, and » ù ± ¾ ² Ù × ÷ release for open. LED INDICATOR LED Lights red while MIC-SP JACKS transmitting; lights ° ´ Ë ³ Ê ± Õ ë · ½ Ï ò ×...

  • Page 6: Scan Function

    2) Carrier wave control : Transmitting: The transceiver will pause the scan after receiving To make a call, press PTT, and speak signals and will restart the scan 3 seconds later after in normal voice, please hold the the pause disappears. microphone 1.5 inches away from your mouth.

  • Page 7: Auxiliary Function

    AUXILIARY FUNCTIONS REMARKS: The above mentioned currently working channel means the channel in which the transceiver holds TIME-OUT- TIMER on under the following four conditions. The purpose of the Time -out -Timer is to prevent any single person from using a channel to transmit for an extended 1) Before restarting the scan after receiving the period of the time.

  • Page 8: Monitor

    TROUBLESHOOTING GUIDE MONITOR PROBLEM SOLUTION When there is no signal received , the squelch 1) The battery pack may be circuit on the transceiver automatically mutes dead. Recharge or replace the speaker, so you will not hear background the battery pack . noise.
  • Page 9 STANDARD SPECIFICATION Ö ÷ Ò ª ¼ ¼ Ê õ Ö ¸ ± ê Caution: PT 2208 PT 3208 PT 3208 (3)420-450 (1) 400-420 FREQUENCY (1) 136-150 Any changes or modifications not expressly approved by (2)450-470 (Mhz) (2) 150-174 the party responsible for compliance could void the user's R F POWER authority to operate the equipment.

This manual is also suitable for:

Pt3208

Table of Contents