imex Bullseye 80 User Manual page 14

Double Pythagorean calculation
E.g. using 3 measurements to determine a distance
Press this button until this symbol
Press this button to trigger the measurement. Then the first value is
adopted.
Press this button to trigger the measurement. Then the second
value is adopted. You can also press and hold down this button
trigger continuous measurement, sweep the laser back and forth and up and
down over the ideal target point. Press to stop the measurement then the
minimum value is adopted.
Press this button to trigger the measurement. Then the third value
is adopted.
The result is displayed in the summary line, the partial results in the
secondary lines.
Storage of constant / historical storage
Storage of constant
You can store and recall a frequently used value (e.g. height of a room).
Measure the desired distance, press and hold the
device beeps to confirm storage.
Recalling the constant
Press this button once to recall the constant and then press the
button to enter it into your calculation.
appears on the display.
13
.
button until the
to