FIG.D
23-006
www.powercommander.com
7
Locate the stock O2 sensor connection. This is under the fuel tank on the left
hand side of the frame (Fig. D).
8
Unplug this connection and plug the supplied O2 Optimizer to the stock wiring
harness in place of the stock O2 sensor.
The stock O2 sensor will not be used. It can be removed from the exhaust if
desired and if you have a way to plug the hole in the exhaust.
9
Reinstall the fuel tank and the seat.
2008-2011 Husqvarna 250 models - PCV - 4
Need help?
Do you have a question about the Power Commander V and is the answer not in the manual?