Verifying Correct Operation; General; Verifying Data Connectivity; Table 7-1: Su-Ni Leds - BreezeCOM SU-A-2.4 Series Installation Manual

7. VERIFYING CORRECT OPERATION

7.1 General

After completing the installation as described above, the system starts operation.
To verify correct operation, view the LED indicators located on the front panel
of the SU-NI Indoor unit as shown in Figure 2-8 on page 14.
Table 7-1 lists the various LED states.
Name
PWR
WLNK
ETH
connector
embedded
LED
ETH
connector
embedded
LED

7.2 Verifying Data Connectivity

From the user's PC or from a portable PC connected to the unit, Ping the unit or
try to connect it to the Internet.
BreezeACCESS 2.4 Series

Table 7-1: SU-NI LEDs

Description
Power supply On – After successful power up
Off – Power off
Wireless link Blinking – Receiving packet from the wireless
activity link
Off – No reception of packets from the wireless
link
Ethernet On – Receive/Transmit on Ethernet port
activity
Off – No Receive/Transmit on Ethernet port
Ethernet On – Unit is connected to Ethernet segment
Integrity
Off – Unit is not connected to Ethernet segment
23
Verifying Correct Operation
Functionality
SU-A/E Subscriber Units Installation Manual