Basic Installation
6. Use a straight Ethernet 10baseT cable to connect a PC (SU-A/E -1D or SU-
A/E-1D1V), or a hub (all other units) to the Ethernet port (marked ETH)
located on the rear panel of the SU-NI unit.
7. For units that support voice connect the telephone cord to the telephone port
(marked TEL) located on the rear panel. Connect the other side of the cord
to the user's telephone set.
SU-A/E Subscriber Units Installation Manual
P W R
W L N K
M O N
Figure 2-8. SU-NI Front Panel
14
BreezeACCESS 2.4 Series