Table of Contents
Advertisement
Using the OSD
This unit incorporates an OSD(On-screen display) function to provide information about basic operation of this unit and to
simplify the setup procedures.
The OSD function uses a monitor TV connected to this unit as a display and has two kinds of display modes such as current
status display and menu screen.
Notes: Any on-screen display shown on the monitor TV will not be recorded onto VIDEO 1.
CURRENT STATUS DISPLAY
When the AUTO OSD mode is set to ON on the menu screen, this mode shows the status corresponding to each
operation.
• The on-screen display will automatically disappear in several seconds.
• For examples, there are 2 status displays as follows.
When selecting the desired input source
Input source
Digital input
MENU SCREEN
• This function simplifies the setup procedures.
• The menu screen operation is performed easily with the CURSOR control( ,
Turn the menu screen on.
1
T/V
• The main menu will be shown.
• To turn the menu screen off, press this button.
1
2
3
5
6
7
9
0
+10
MACRO
M1
M2
M3
When selecting the TEST TONE mode
• When the speaker setting is "N", the test tone of the
corresponding channel is not shown.
• When adjusting each channel level or overall volume, the
volume level display will be shown.
• The test tone display will be shown until the test tone mode is
canceled.
T/V
OSD
4
1
2
3
8
5
6
7
9
0
+10
MACRO
M1
M2
M3
37
,
,
), OSD and ENTER buttons.
4
8
Hide quick links:
Advertisement
Table of Contents
