Using The Osd; Current Status Display - Sherwood NewCastle R-945 User Manual

Using the OSD

This receiver incorporates an OSD (On screen display) function to provide information about basic operation of this receiver
and to simplify the set-up procedures.
The OSD function uses a monitor TV connected to this receiver as a display and has two kinds of display modes such as
current status display and menu screen.
Notes:
When a monitor TV is connected to this receiver with the S-VIDEO cord, the OSD function is not available.
If any on screen display is shown on the monitor TV while recording with VCR, the on screen display is not recorded.
If the OSD button is pressed for more than 3 seconds, the present color system is shown on the fluorescent display.
If it is different from yours, press the OSD button briefly to change to the NTSC color system and the MEMORY/ENTER
button to memorize.

CURRENT STATUS DISPLAY

This mode shows the basic set-ups and the status during the operation of this receiver. The following items will be shown
corresponding to each operation mode.
The on screen display will automatically disappear in 3 sec. for power on or 10 sec. for other operations.
When the power of this receiver is turned on or the
OSD button is pressed.
AUDIO SOURCE: PHONO
VIDEO SOURCE: DVD
VCR 1 REC OUT
AUDIO: PHONO
VIDEO: DVD
SURROUND: DOLBY DIGITAL
MASTER VOLUME
Basic set-up display
Whe the OSD button is pressed, the OSD indicator on
the button lights up.
When the surround (rear, center, subwoofer) levels are
adjusted.
RL:+1 dB RR: -2dB
CENTER LEVEL: 0dB
SUBWOOFER LEVEL: -10dB
Surround level display
When the TEST TONE button on the remote control is
pressed .
TEST TONE
FL
RL SW
Test tone disply
C FR
RR
26
When the (overal) volume is adjusted
MASTER VOLUME
Volume display
When the MUTE button on the remote control is pressed.
Mute display
Wen the SLEEP button on the remote control is pressed.
SLEEP: 90 MIN
Sleep display
MUTE